562617
7
Zoom out
Zoom in
Previous page
1/20
Next page
Descaling
1. Press the P button to enter the menu;
2. Turn the selection knob until "Descaling" is
displayed;
3. Press the button;
4. The message "Confirm?" is displayed.
5. Press the button to confirm (or the
button to cancel the operation);
6. Carry out descaling as described in the sec-
tion "Descaling" on page 19.
Setting the temperature
1. Press the P button to enter the menu;
2. Turn the selection knob until "Set
Temperature" is displayed;
3. Press the button;
4. Turn the selection knob until the required tem-
perature (high, medium, low) is displayed;
5. Press the button to confirm (or the
button to cancel the operation);
6. Press the button to exit the menu.
Auto-Off
1. Press the P button to enter the menu;
2. Turn the selection knob until "Auto-Off" is dis-
played;
3. Press the button;
4. Turn the selection knob until the required
number of hours of operation (1, 2 or 3) is
displayed;
5. Press the button to confirm (or the
button to cancel the operation);
6. Press the button to exit the menu.
Setting water hardness
1. Press the P button to enter the menu;
2. Turn the selection knob until "Water Hardness"
is displayed;
3. Press the button;
4. Turn the selection knob until the water hard-
ness measured using the indicator strip is dis-
played (see paragraph "Measuring water hard-
ness" - page 19);
5. Press the button to confirm (or the
button to cancel the operation);
6. Press the button to exit the menu.
Resetting factory default values
(reset)
This function resets the entire menu with the
default values (except the language, which
remains as set).
1. Press the P button to enter the menu;
2. Turn the selection knob until "Default Values"
is displayed;
3. Press the button;
4. The message "Confirm?" is displayed.
5. Press the button to confirm and exit
(or the button to cancel the opera-
tion);
Installing the filter
Certain models
are provided with a water
softener filter (alternatively it can be pur-
chased separately from an authorized
Customer Service Center).
To install the filter, proceed as follows:
1. Insert the filter in the water tank as
far as it will go (see figure
alongside).
When you install the filter, you
must notify the appliance of its
presence.
2. Press the P button to enter
the menu;
3. Turn the selection knob until "Install Filter" is
displayed;
4. Press the button;
5. The message "Confirm?" is displayed.
6. Press the button to confirm (an aster-
isk appears at the top right of the display);
7. Press the button to exit the menu.
Replacing the filter ("Reset water
filter")
When the red light comes on, the filter must
be replaced:
1. Extract the exhausted filter and replace with a
new one;
2. Press the P button to enter the menu;
3. Turn the selection knob until "Reset Water
Filter" is displayed;
4. Press the button;
5. The message "Confirm?" is now displayed.
6. Press the button to confirm (or the
button to cancel the operation);
7. Press the button to exit the menu.
12
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ESAM 5500 Perfecta at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ESAM 5500 Perfecta in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ESAM 5500 Perfecta

DeLonghi ESAM 5500 Perfecta User Manual - English - 18 pages

DeLonghi ESAM 5500 Perfecta User Manual - German - 25 pages

DeLonghi ESAM 5500 Perfecta User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info