111281
19
Zoom out
Zoom in
Previous page
1/22
Next page
17
hamic or acetic based descalers. Their use in-
validates the guarantee. Failure to descale the
appliance as described above also invalidates the
guarantee.
1. Turn the machine on.
2. Press the P button to enter the menu.
3. Turn the selector knob until the light
flashes. Press : the and lights
alternates.
4. Completely empty the water tank (A7); em-
pty the drip tray (A11) and the coffee groun-
ds container, then reinsert them.
Pour the descaler diluted with water (respec-
ting the proportions indicated on the desca-
ler pack) into the water tank and reinsert it.
Place an empty container with a minimum
capacity of 1.5 litres under the hot water
spout.
Important! Danger of burns!
Hot water containing acid flows from the cap-
puccino maker. Avoid contact with splashes of
water.
5. Press the button: the descaling pro-
gramme starts and the descaler liquid comes
out of the cappuccino maker.
The descale programme automatically per-
forms a series of rinses and pauses to remo-
ve limescale deposits from inside the machi-
ne.
After about 30 minutes, the water tank is empty.
The OK and lights comes on and the
and lights come on.
6. The appliance is now ready for rinsing throu-
gh with clean water. Remove the water tank,
empty, rinse under running water, fill with
clean water and replace.
7. Empty the container used to collect the de-
scaler solution and replace it empty under
the cappuccino maker.
8. Press the button to start rinsing. Hot
water comes out of the spout and and
lghts come on.
9. When the water tank is completely empty,
the and OK lights come on.
10. Press the button: the appliance
switches automatically off.
Before switching on the appliance, by pressing
the button, empty the drip tray.
SETTING WATER HARDNESS
The light comes on after a period of time
established according to water hardness.
The machine is set by default for a hardness va-
lue of 4 (very hard water).
The machine can also be programmed according
to the hardness of the mains water in the various
regions so that the machine needs to be descaled
less often.
Measuring water hardness
1. Remove the “TOTAL HARDNESS TEST” indi-
cator paper attached to this manual from its
pack.
2. Immerse the paper completely in a glass of
water for one second.
3. Remove the paper from the water and shake
lightly.
After about a minute, 1, 2, 3, or 4 red squares
form, depending on the hardness of the wa-
ter. Each square corresponds to one level.
Level 1
Level 2
Level 3
Level 4
Set water hardness
1. Press the P button to enter the menu.
2. Turn the selector knob until the light is
selected.
3. Confirm the selection by pressing the
button.
4. Turn the selection knob and set the level
shown by the indicator paper (see previous
paragraph).
Level 1
Level 2
Level 3
Level 4
5. Press the button to confirm the set-
ting.
6. Press the button to exit the menu.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ESAM 5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ESAM 5400 in the language / languages: English as an attachment in your email.

The manual is 6,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ESAM 5400

DeLonghi ESAM 5400 User Manual - German - 22 pages

DeLonghi ESAM 5400 User Manual - Dutch - 23 pages

DeLonghi ESAM 5400 User Manual - Dutch - 22 pages

DeLonghi ESAM 5400 Quick start guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info