111281
11
Zoom out
Zoom in
Previous page
1/22
Next page
9
“ESC” button to exit from the selected
function and go back to the main menu).
B9. P button: to access the Programming
menu.
B10. button: turns the appliance on and off
(stand by).
Explanation of lights
The Hot Water function is selected.
The Steam function is selected.
The rinse cycle is selected.
Indicates the need to descale the applian-
ce.
Light: no water or water tank absent
Light flashing: the machine is heating up
or a rinse cycle is underway.
The appliance is delivering two cups of
coffee.
An alarm is displayed on the control panel
(see the section: “Explanation of lights”).
Light on steadily: the grounds container is
missing and must be inserted in the ap-
pliance; Light flashing: the grounds con-
tainer is full and must be emptied.
Indicates the button to press to exit the
programming menu or selected function.
Indicates the button to press to confirm
the function selected in the programming
menu.
“Energy Saving” mode is active.
PRELIMINARY CHECKS
Checking the appliance
After removing the packaging, make sure the
product is complete and undamaged and that all
accessories are present. Do not use the applian-
ce if it is visibly damaged. Contact De’Longhi
Customer Services.
Installing the appliance
Important!
When installing the appliance, respect the fol-
lowing safety warnings:
• The appliance gives off heat. After positio-
ning the appliance on the worktop, leave a
space of at least 3 cm between the surfaces
of the appliance and the side and rear walls
and at least 15 cm above the coffee maker.
• Water penetrating the coffee maker could
cause damage. Do not place the appliance
near taps or sinks.
• Theappliancecouldbedamagedifthewater
it contains freezes.
Do not install the appliance in a room where
the temperature could drop below freezing
point.
• Arrangethepowercableinsuchawaythatit
cannot be damaged by sharp edges or con-
tact with hot surfaces (e.g. electric hot pla-
tes).
Connecting the appliance
Important!
Check that the mains power supply voltage cor-
responds to the value indicated on the rating
plate on the bottom of the appliance.
Connect the appliance to an efficiently earthed
and correctly installed socket with a minimum
current rating of 10A only.
If the power socket does not match the plug on
the appliance, have the socket replaced with a
suitable type by a qualified professional.
Using the coffee maker for the first time
Please note :
• Coffee has been used to factory test the
appliance and it is therefore completely
normal for there to be traces of coffee in the
mill.
The machine is, however, guaranteed to be
new.
• You should customise water hardness as
soon as possible following the instructions
in the section “Setting water hardness” on
page 17.
1. Remove the water tank, fill to the MAX line
with fresh water then replace in the appliance
(fig. 1).
2. Turn the cappuccino maker outwards and
place a container with a minimum capacity
of 100 ml underneath (fig. 2).
3. Plug the appliance into the mains socket and
place the main switch on the back of the ap-
pliance in the I position (fig. 3).
4. The light comes on and OK flashes.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ESAM 5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ESAM 5400 in the language / languages: English as an attachment in your email.

The manual is 6,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ESAM 5400

DeLonghi ESAM 5400 User Manual - German - 22 pages

DeLonghi ESAM 5400 User Manual - Dutch - 23 pages

DeLonghi ESAM 5400 User Manual - Dutch - 22 pages

DeLonghi ESAM 5400 Quick start guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info