111139
13
Zoom out
Zoom in
Previous page
1/15
Next page
18
MEANING OF THE ALARM LIGHTS
LIGHTS DESCRIPTION MEANING WHAT TO DO
1
2
3
4
5
6
7
8
9
10
11
The light is on
steadily
Insufficient water in tank
or tank not correctly in
place
Fill the tank with water and/or in-
sert it correctly, pushing it as far as
it will go until it clicks into place.
The tank is dirty and/or
clogged
Rinse or descale the tank
1
2
3
4
5
6
7
8
9
10
11
The light flashes
The grinding is too fine
and the coffee is delivered
too slowly
Repeat coffee delivery and turn
the grinding adjustment knob (fig.
10) one click clockwise towards
“7” while the coffee mill is in ope-
ration. If after making at least 2
coffees delivery is still too slow,
repeat the correction procedure,
turning the grinding adjustment
knob another click until delivery
is correct (see the section: “Adju-
sting the coffee mill).
The machine is not able to
make coffee
If the problem persists, turn the
steam knob to the I position and
deliver water from the cappuccino
maker
1
2
3
4
5
6
7
8
9
10
11
The light is on
steadily
The grounds container is
full or missing
Empty the grounds container and
drip tray, clean and replace (fig.
18).
Important: when removing the drip
tray, the grounds container MUST
be emptied, even if it contains few
grounds.
If this is not done, when you make
the next coffees, the grounds con-
tainer may fill up more than expec-
ted and clog the machine
1
2
3
4
5
6
7
8
9
10
11
The light flashes
The “pre-ground coffee”
function has been
selected without placing
any pre-ground coffee in
the funnel
Place pre-ground coffee in the fun-
nel or deselect the “pre-ground”
function
The coffee beans have
run out
Fill the beans container
If the coffee mill is very
noisy, this means a small
stone in the coffee beans
has blocked the mill.
Contact Customer Services
1
2
3
4
5
6
7
8
9
10
11
The light flashes
The machine must be de-
scaled
The descaling procedure described
in the section “Descaling” needs to
be performed as soon as possible.
1
2
3
4
5
6
7
8
9
10
11
There is an unusual
noise and the lights
flash alternately
The infuser has not been
replaced after cleaning
Leave the service door closed and
the infuser out of the coffee maker.
Press the or but-
tons together until the four lights
go off. Only when all four lights are
off can the door be opened and the
infuser inserted.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ESAM 4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ESAM 4200 in the language / languages: English as an attachment in your email.

The manual is 4,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ESAM 4200

DeLonghi ESAM 4200 User Manual - German - 17 pages

DeLonghi ESAM 4200 User Manual - Dutch - 20 pages

DeLonghi ESAM 4200 Additional guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info