Manual DeLonghi ESAM 3550 - MAGNIFICA (page 11 of 19) (English)

562640

Zoom out

Zoom in

1/19

The appliance is ready for use only after completion of this

cycle.

Danger of burns!

During rinsing, a little hot water comes out of the coee spouts

and is collected in the drip tray underneath.

Avoid contact with splashes of water.

• Toturntheapplianceon,pressthe button (g. 5).

The message “HEATING UP, PLEASE WAIT” is displayed.

After heating, the message “RINSING” is displayed. As well as

heating the boiler, the appliance also heats the internal circuits

by circulating hot water.

The appliance is at temperature when the message “READY

STANDARD TASTE” is displayed.

TURNING THE APPLIANCE OFF

Each time the appliance is turned o, it performs an automatic

rinse cycle which cannot be interrupted.

Important!

To avoid damaging the appliance, always press the

button to turn o.

Danger of burns!

During rinsing, a little hot water ows from the coee spouts.

Avoid contact with splashes of water.

To turn the appliance o, press the button (g. 5).

Please note:

If the appliance is not used for an extended period, place the

main switch in the 0 position (g. 6).

Never place the main switch in the 0 position while the

appliance is on.

MENU SETTINGS

The following menu items can be selected: Clock, Start, Auto-

start, Descale, Temperature, O after, Water hardness, Default

values.

To access the settings menu, press the MENU button. The light

on the button comes on.

Clock

To adjust the time on the display, proceed as follows:

1. Access the menu and press the NEXT button until “CLOCK”

is displayed;

2. Press the CHANGE button to change the time (hold the

button down to change the time rapidly). When you have

nished, release the button. The time ashes.

3. Press the OK button to conrm;

4. Press the MENU button to exit the menu. The light on the

button goes o.

The time displayed when the machine is o (stand-by) is now

set.

Turning on

Once “AUTO-START Yes” has been enabled, the auto-start time

must be set as follows:

1. Access the menu and press the NEXT button until “START”

is displayed.

2. Press the CHANGE button to change the start time (hold

the button down to change the time rapidly). When you

have nished, release the button. The auto-start time

ashes on the display.

3. Press the OK button to conrm.

4. To exit the menu, press the MENU button. The light on the

button goes out.

The auto-start time has been programmed.

Auto-start

You can set the auto-start time in order to have the appliance

ready at a certain time (for example in the morning) so you can

make coee immediately.

Please note!

To enable this function, the time must be set correctly (see

previous section “Clock”).

To set the auto-start time, proceed as described in the section

below.

1. Access the menu and press the NEXT button until “AUTO-

START No” or “AUTO-START Yes” (if the function has been

enabled) is displayed;

2. Press the CHANGE button to change the selection. The

new selection ashes on the display;

3. Press the OK button to conrm;

To set the auto-start time, proceed as described in the section

below.

The symbol is displayed alongside the clock to indicate

that auto-start has been programmed (in stand-by).

Descaling

For instructions on descaling, see page 15.

Temperature

To modify the temperature of the water used to make the

coee, proceed as follows:

1. Access the menu and press the NEXT button until

“TEMPERATURE” is displayed;

2. Press the CHANGE button until the required temperature

(low, medium, high, maximum) is displayed;

3. Press the OK button to conrm;

4. Press the MENU button to exit the menu. The light on the

button goes o.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ESAM 3550 - MAGNIFICA in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ESAM 3550 - MAGNIFICA

DeLonghi ESAM 3550 - MAGNIFICA User Manual - German - 22 pages

DeLonghi ESAM 3550 - MAGNIFICA User Manual - Dutch - 17 pages

DeLonghi ESAM 3550 - MAGNIFICA Quick start guide - All languages - 7 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi ESAM 3550 - MAGNIFICA Manual

Product: