Manual DeLonghi ESAM 2800 - CAFFE CORSO (page 17 of 22) (English)

562641

17

Zoom out

Zoom in

Previous page

1/22

Next page

15

red buttons have snapped out.

8. Close the infuser door.

9. Replace the water tank.

DESCALING

Descale the appliance when the light on the

panel ﬂashes.

Important!

Descaler contains acids which may irritate the

skin and eyes.

It is vital to respect the manufacturer’s safety

warnings given on the descaler pack and the

warnings relating to the procedure to follow in

the event of contact with the skin and eyes.

Please note:

Use De’Longhi descaler only.

Under no circumstances should you use sulpha-

mic or acetic based descalers. Their use invalida-

tes the guarantee.

Failure to descale the appliance as described

above also invalidates the guarantee.

1. Turn the machine on.

2. Empty the water tank (A12).

3. Pour the descaler diluted with water (respec-

ting the proportions indicated on the desca-

ler pack) into the water tank.

Place an empty container with a minimum

capacity of 1.5 litres under the hot water

spout.

4. Wait for the and lights to come

on steadily.

Important! Danger of burns

Hot water containing acid ﬂows from the cap-

puccino maker. Avoid contact with splashes of

water.

5. Press the button and hold it down for

at least 5 seconds to conﬁrm that you have

added the solution and begin the descaling

procedure. The light in the button remains

on steadily to indicate that the descaling

programme has begun (the and

lights go out as coffee cannot be made).

6. Turn the steam knob a half turn anticlockwi-

se. The descaler solution ﬂows out of the

cappuccino maker into the underlying con-

tainer.

The descale programme automatically per-

forms a series of rinses and pauses to remo-

ve limescale deposits from inside the machi-

ne.

After about 30 minutes, the water tank is empty

and the light comes on. Turn the steam knob

a half turn clockwise as far as it will go.

The appliance is now ready for rinsing through

with clean water.

11. Empty the container used to collect the de-

scaler solution and replace it empty under

the cappuccino maker.

12. Remove the water tank, empty, rinse under

running water, ﬁll with clean water and repla-

ce.

13. Turn the steam knob a half turn anticlockwi-

se. Hot water comes out of the spout.

14. When the water tank is completely empty,

the light goes out and the light co-

mes on.

15. Turn the knob to the 0 position, ﬁll the water

tank again and the appliance goes off auto-

matically.

To use the appliance, turn it on by pressing the

button.

SETTING WATER HARDNESS

The message comes on after a period of

time established according to water hardness.

The machine is set by default for a hardness va-

lue of 4 (very hard water).

The machine can also be programmed according

to the hardness of the mains water in the various

regions so that the machine needs to be descaled

less often.

Measuring water hardness

1. Removethe“TOTALHARDNESSTEST”indi-

cator paper attached to this manual from its

pack.

2. Immerse the paper completely in a glass of

water for one second.

3. Remove the paper from the water and shake

lightly. After about a minute, 1, 2, 3, or 4 red

squares form, depending on the hardness of

the water. Each square corresponds to one

level.

Level 1

Level 2

1

I have followed instructions for desalination my machine but the red light won't go off and not making any coffee.. what have a done wrong? Submitted on 28-5-2022 at 14:37
Reply Report abuse
The dealer light is flashing I have tried to decals twice but it has not done it the machine is 5months old
Submitted on 3-3-2022 at 13:09
Reply Report abuse
My diffuser is stuck and will not come out tried switching on and off but I can not insert tray. The infuser will not return to raised position. In its current position it is too low to allow the tray to be replaced. Depressing the red buttons does not help Submitted on 24-12-2021 at 15:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for DeLonghi ESAM 2800 - CAFFE CORSO at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ESAM 2800 - CAFFE CORSO in the language / languages: English as an attachment in your email.

The manual is 6,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ESAM 2800 - CAFFE CORSO

DeLonghi ESAM 2800 - CAFFE CORSO User Manual - German - 17 pages

DeLonghi ESAM 2800 - CAFFE CORSO User Manual - Dutch - 16 pages

DeLonghi ESAM 2800 - CAFFE CORSO Quick start guide - All languages - 7 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info