Manual DeLonghi ESAM 2800 - CAFFE CORSO (page 14 of 22) (English)

562641

14

Zoom out

Zoom in

Previous page

1/22

Next page

12

damage the appliance.

• Neverusemorethanonelevel

measure or it could dirty the

inside of the machine or block

the funnel.

Please note:

If you use pre-ground coffee, you can only

make one cup of coffee at a time.

1. Turn the coffee taste selection knob to the

position.

2. Make sure the funnel is not blocked, then

add one level measure of pre-ground coffee

(ﬁg. 13).

3. Place a cup under the coffee spouts.

4. Press the 1 cup coffee button (ﬁg. 11).

To deactivate the pre-ground coffee function,

turn the knob to one of the other positions.

Please note:

A few seconds may elapse between energy sa-

ving mode and delivery of the ﬁrst coffee.

MAKING CAPPUCCINO

Important! Danger of burns

During preparation, steam is given off. Take care

to avoid scalds.

1. When preparing cappuccino, make the cof-

fee in a large cup;

2. Fill a container with about 100 grams of milk

for each cappuccino to be made. In choosing

the size of the container, bear in mind that

the milk doubles or triples in volume;

Please note:

For a richer denser froth, use skimmed or

partially skimmed milk at refrigerator tempe-

rature (about 5°C).

To avoid milk with poor froth or large bub-

bles, always clean the cappuccino maker as

described in the section “Cleaning the cap-

puccino maker”.

3. Press the button. The corresponding

light ﬂashes, indicating that the appliance is

heating up;

5. Turn the cappuccino maker outwards and

immerse in the milk container (ﬁg. 13);

6. Turn the steam knob to the I position. Ste-

am is delivered from the cappuccino maker,

giving the milk a creamy frothy appearance

and making it more voluminous;

7. For a creamier froth, rotate the container

with slow movements in an upward direc-

tion. (You should not discharge steam for

more than 3 minutes at a time);

8. When you have obtained the required froth,

stop steam delivery by turning the steam

knob back to the 0 position.

Important! Danger of burns

Stop steam delivery before removing the

container with the frothed milk to avoid

burns caused by splashes of boiling milk.

9. Add the milk froth to the cup of coffee

prepared previously. The cappuccino is

ready. Sweeten to taste and, if desired,

sprinkle the froth with a little cocoa powder.

Please note:

• Ifimmediatelyaftermakingcappuccinoand

deactivating the steam function by pressing

the steam button you press the or

button because you want to make

another coffee, the coffee maker will be too

hot (the and lights ﬂash to in-

dicate an unsuitable temperature). You must

wait about ten minutes for the appliance too

cool down sufﬁciently.

To cool it down more quickly, after deactiva-

ting the steam function, open the steam knob

and let the water ﬂow out of the cappuccino

maker into a container until the lights

and stop ﬂashing.

Cleaning the cappuccino maker after use.

Clean the cappuccino maker each time you use it

to avoid the build-up of milk residues or blocka-

ges.

Important! Danger of burns

When cleaning the cappuccino maker, a little hot

water is delivered.

Avoid contact with splashes of water.

1. Deliver a little water for a few seconds by ro-

tating the steam knob to the I position.

Then turn the steam knob to the 0 position to

stop the ﬂow of hot water.

1

I have followed instructions for desalination my machine but the red light won't go off and not making any coffee.. what have a done wrong? Submitted on 28-5-2022 at 14:37
Reply Report abuse
The dealer light is flashing I have tried to decals twice but it has not done it the machine is 5months old
Submitted on 3-3-2022 at 13:09
Reply Report abuse
My diffuser is stuck and will not come out tried switching on and off but I can not insert tray. The infuser will not return to raised position. In its current position it is too low to allow the tray to be replaced. Depressing the red buttons does not help Submitted on 24-12-2021 at 15:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for DeLonghi ESAM 2800 - CAFFE CORSO at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ESAM 2800 - CAFFE CORSO in the language / languages: English as an attachment in your email.

The manual is 6,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ESAM 2800 - CAFFE CORSO

DeLonghi ESAM 2800 - CAFFE CORSO User Manual - German - 17 pages

DeLonghi ESAM 2800 - CAFFE CORSO User Manual - Dutch - 16 pages

DeLonghi ESAM 2800 - CAFFE CORSO Quick start guide - All languages - 7 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info