Manual DeLonghi ECAM46.860 - Eletta Cappuccino Evo (page 17 of 24) (English)

770035

Zoom out

Zoom in

1/24

purchase one from De’Longhi customer services. To use the lter

correctly, follow the instructions below.

14.1 Installing the lter

1. Remove the lter (C4) from the packaging. The date indica-

tor disk varies according to the lter provided.

2. Turn the date indicator disk (g. 34) until the next 2

months of use are displayed.

0,5 L

Please note

The lter lasts about two months if the appliance is used nor-

mally. If the coee maker is left unused with the lter installed,

it will last a maximum of three weeks.

3. To activate the lter, run tap water through the hole in the

lter as shown in g. 35 until water comes out of the open-

ings at the side for more than a minute;

36 37

4. Extract the tank (A14)

from the appliance and

ll with water;

5. Insert the lter in the

water tank and immerse

it completely for about

ten seconds, sloping it

and pressing it lightly to

enable the air bubbles to

escape (g.36);

6. Insert the lter in the lter housing (A15) and press fully

home (g. 37);

7. Close the tank with the lid (A13) (g. 38), then replace the

tank in the machine;

8. When you install the lter you must notify the appliance

of its presence.

9. Press (B2) to enter the "Settings" menu;

10. Press the scroll arrows (B3) or (B10)until

"Maintenance" is displayed, then press (B11);

11. Press the scroll arrows until "Install lter" is displayed, then

press ;

12. Press to conrm;

13. Place an empty container with a minimum capacity of 500

ml under the hot water spout (C6), then press to

start delivery;

14. The appliance starts delivering water;

15. After the ow of hot water stops, the appliance automati-

cally reverts to ready for use again.

The lter is now active and you can use the coee machine.

14.2 Replacingthe lter

Replace the lter (C4) when requested by the appliance. To re-

place immediately, press (B11) and follow the instruc-

tions from point 8. To replace the lter later, press (B2).

The symbol appears on the display to remind you that the

lter needs replacing.

To replace, proceed as follows:

1. Extract the tank (A14) and exhausted lter;

2. Take the new lter out of its packet and proceed as illus-

trated in points 2, 3, 4, 5, 6 and 7 in the previous section;

3. Press to enter the "Settings" menu;

4. Press the scroll arrows (B3) or (B10) until

"Maintenance" is displayed, then press ;

5. Press the selection arrows until "Replace lter" is dis-

played, then press ;

6. Press to conrm;

7. Place an empty container with a minimum capacity of 500

ml under the hot water spout (C6), then press (g.

8) to start delivery;

8. After the ow of hot water stops, the appliance automati-

cally reverts to ready for use again.

The new lter is now active and the coee machine can be used.

Please note:

After two months (see date indicator) or when the appliance has

not been used for 3 weeks, you should replace the lter even if

the message has not yet been displayed.

14.3 Removing the lter

If you want to use the appliance without the lter (C4), you

must remove it and notify the appliance of its removal. Proceed

as follows:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM46.860 - Eletta Cappuccino Evo in the language / languages: English as an attachment in your email.

The manual is 12.82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM46.860 - Eletta Cappuccino Evo

DeLonghi ECAM46.860 - Eletta Cappuccino Evo User Manual - German - 24 pages

DeLonghi ECAM46.860 - Eletta Cappuccino Evo User Manual - Dutch - 131 pages

DeLonghi ECAM46.860 - Eletta Cappuccino Evo User Manual - French, Italian - 44 pages

DeLonghi ECAM46.860 - Eletta Cappuccino Evo User Manual - Portuguese, Spanish - 131 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi ECAM46.860 - Eletta Cappuccino Evo Manual

Product: