800462

DeLonghi ECAM450.65 Eletta Explore Manual

21
Zoom out
Zoom in
Previous page
1/32
Next page
21
12. Place the container used to collect the descaler solution
empty under the spouts and press “Next” to start rinsing;
13. Hot water is delivered from both the hot water spout and
coee spouts;
14. When the water in the tank has run out, empty the con-
tainer used to collect the rinsing water;
15. Extract the water tank and put back the water softener l-
ter if removed previously. Press “Next” to continue;
16. Fill the tank with fresh water up to the MAX level, put back
in the appliance and press “Next” to continue;
17. Place the container used to collect the descaler solution
empty under the spouts
and press “Next” to start another
rinsing cycle;
18. When the water in the tank has run out, empty the con-
tainer used to collect the rinsing water, remove and empty
the drip tray (A15) and grounds container
(A10), then put
back in the appliance;
19. Extract the water tank, top up to the max level, put back in
the appliance and press “Next”
20. The descaling process is now complete”. Press “OK”. The ap-
pliance performs a rapid preheat cycle and then goes back
to the homepage.
Please note:
• If the descaling cycle is not completed correctly (e.g. elec-
trical power failure) it is advisable to repeat the procedure;
• After descaling, it is normal for the grounds container
(A10) to contain water.
• If the water tank has not been lled to the MAX level after
descaling, the appliance prompts for a third rinse to ensure
that the descaler solution has been completely eliminated
from the machine’s internal circuits. Before starting rins-
ing, remember to empty the drip tray.
17. SETTING WATER HARDNESS
The descaling alarm is displayed after a period of time estab-
lished according to water hardness. The machine can also be
programmed according to the actual hardness of the local water
supply, so that the descaling procedure will be required less
frequently.
17.1 Measuring water hardness
1. Remove the “Total hardness test” indicator paper (D1) from
its pack (attached to the Quick Guide).
2. Immerse the paper completely in a glass of water for about
one second.
3. Remove the strip from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares appear, depending
on the hardness of the water. Each square corresponds to
1 level.
17.2 Setting water hardness
1. Press the settings menu icon (C3) on the homepage (C);
2. Scroll the pages and select “Water hardness”;
3. Press “Set”;
4. Carry out the procedure described in the previous section
and measure water hardness;
5. Press the dot corresponding to the water hardness meas-
ured previously as indicated in the following table:
Total Hardness Test (D1) Water hardness
Green Red Level 1
Green Red Level 2
Green Red Level 3
Red Level 4
6. The machine is now reprogrammed with the new water
hardness setting.
7. Press “<” to go back to the settings menu.
18. WATER SOFTENER FILTER
Certain models are tted with a water softener lter (D4). If this
is not the case with your model, you are recommended to pur-
chase one from De’Longhi Customer Services.
To use the lter correctly, follow the instructions below.
18.1 Installing the lter
1. Press the settings menu (C3);
2. Scroll through the pages and select “Water lter”;
3. Press “OK” to enter the guided procedure
4. Remove the lter from the packaging and turn the date indi-
cator to view the next 2 months (g. 41);
41 42
2
0,5 L
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM450.65 Eletta Explore at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM450.65 Eletta Explore in the language / languages: English as an attachment in your email.

The manual is 5.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM450.65 Eletta Explore

DeLonghi ECAM450.65 Eletta Explore User Manual - German - 36 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Dutch - 144 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Danish - 139 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - French, Italian - 60 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Polish - 139 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Portuguese - 144 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Swedish - 139 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Turkish, Spanish - 144 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Norwegian - 139 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info