800462

DeLonghi ECAM450.65 Eletta Explore Manual

9
Zoom out
Zoom in
Previous page
1/32
Next page
9
5. Customise as you wish, then press “Save” to conrm.
6. Press “<” to save the new selection and go back to the
homepage (C).
6.8 Set auto-o
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1 or 3 hours of inactivity.
To programme auto-o, proceed as follows:
1. Press the settings menu (C3);
2. Scroll through the pages until “Set auto-o” is displayed;
3. Select the desired time interval (15 or 30 minutes, or 1 or
3 hours).
4. Press “X” to save the new selection and go back to the
homepage (C).
6.9 General
1. Press the settings menu (C3);
2. Scroll through the pages until “General” is displayed;
Here you can enable or disable the following functions with a
simple touch:
- “Beep sound”: when enabled, the appliance beeps when-
ever an operation is performed.
- “Energy saving”: use this function to enable or disable en-
ergy saving. When enabled, the function reduces energy
consumption in compliance with European regulations.
is displayed on the homepage to show it is active.
3. Press “X” to save the new selection and go back to the
homepage (C).
6.10 Water lter
For instructions on the lter (D4), see section “18. Water soften-
er lter””.
6.11 Water hardness
For instructions on setting water hardness, see section “17. Set-
ting water hardness”.
6.12 Default values
This resets all menu settings and user customisation back to
the default values (with the exception of the language, which
remains as set, and the statistics).
Proceed as follows:
1. Press the settings menu (C3);
2. Scroll through the pages until “Default values” is displayed;
3. Press “Next”:
4. Select whether you want to reset the entire appliance or a
single prole, then press “Next”;
5. Follow the instructions, then conrm the reset by pressing
“OK”. The machine displays the homepage (C) again.
Please note:
When the appliance (not the individual prole) has been reset
to the default values, the machine proposes the introductory
tutorial again.
6.13 Drain water
To avoid the water in the circuit freezing if the appliance is to be
left idle for a long period of time, or before taking it to customer
services, we recommend emptying the water circuit.
Proceed as follows:
1. Press the settings menu (C3);
2. Scroll through the pages until “Drain water” is displayed;
3. Press “OK” to start the guided procedure;
4. Extract, empty and replace the grounds container (A10)
and drip tray (A15) (g. 10), then press “Next”;
10
5. Insert the spout (D6) on the connector (A8) (g. 5);
6. Position a 100 ml container under the spouts (g. 6). Press
“Next”;
7. The appliance performs a rinse cycle with hot water from the
spouts;
8. At the end of rinsing, extract the water tank (A22) (g. 11)
and empty;
9. If present, remove the water softener lter (D4) from the
water tank and press “Next”;
11
10. Put the empty water tank back in the appliance and press
“Next”;
11. Wait for the appliance to empty the circuit; (Important:
hot water from the spouts!). As the water circuit empties,
the appliance could become noisier. This is part of normal
operation.
12. When the circuit is empty, extract and empty the drip tray,
put back in the appliance and press “Next”;
13. Press “OK”. The appliance goes o (standby).
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM450.65 Eletta Explore at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM450.65 Eletta Explore in the language / languages: English as an attachment in your email.

The manual is 5.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM450.65 Eletta Explore

DeLonghi ECAM450.65 Eletta Explore User Manual - German - 36 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Dutch - 144 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Danish - 139 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - French, Italian - 60 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Polish - 139 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Portuguese - 144 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Swedish - 139 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Turkish, Spanish - 144 pages

DeLonghi ECAM450.65 Eletta Explore User Manual - Norwegian - 139 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info