770001
16
Zoom out
Zoom in
Previous page
1/28
Next page
16
18. "EMPTY DRIP TRAY" (g. 22): At the end of the second
rinse, remove, empty and replace the drip tray (A15) and
grounds container (A11) and press ;
19. "DESCALE COMPLETE": press ;
20. "FILL TANK WITH FRESH WATER": empty the container
used to collect the rinse water, remove the water tank and
ll with fresh water up to the MAX level, then put back in
the appliance.
The descaling cycle is now complete.
Please note!
If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle;
After descaling, it is normal for the grounds container
(A11) to contain water.
If the water tank has not been lled to the MAX level, at
the end of descaling, the appliance requests a third rinse to
guarantee that the descaler solution has been complete-
ly eliminated from the machine's internal circuits. Before
starting rinsing, remember to empty the drip tray;
The appliance may request descaling cycles at very short
intervals. This is normal and due to the appliance’s ad-
vanced control system.
14. SETTING WATER HARDNESS
The "DESCALING NEEDED PRESS OK TO START ~45MIN
" message is displayed after a period of time established
according to water hardness.
The machine is set by default for a hardness value of "4". The
machine can also be programmed according to the hardness
of the mains water in the various regions so that the machine
needs to be descaled less often.
14.1 Measuring water hardness
1. Remove the TOTAL HARDNESS TEST indicator paper (D1)
from its pack.
2. Immerse the paper completely in a glass of water for one
second.
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. Each square corresponds to
one level.
Indicator paper Water hardness
Level 1 - soft water
Level 2 - slightly hard
water
Level 3 - hard water
Indicator paper Water hardness
Level 4 - very hard water
14.2 Setting water hardness
1. Access the menu as described in section "6.1 Access the
settings menu";
2. Press "WATER HARDNESS";
3. "WATER HARDNESS" "CURRENT VALUE UNDERLINED": Press
the required level (Level 1 = soft water; Level 4 = very hard
water);
4. Press " " to go back to the homepage.
The machine is now reprogrammed with the new water hard-
ness setting.
15. WATER SOFTENER FILTER
Certain models are tted with a water softener lter (D7). If this
is not the case with your model, you are recommended to pur-
chase one from De’Longhi Customer Services. To use the lter
correctly, follow the instructions below.
15.1 Installing the lter
1. Remove the lter (D7) from the packaging;
2. Access the menu as described in section "6.1 Access the
settings menu";
3. Press "WATER FILTER";
4. "TURN DATE INDICATOR TO NEXT 2 MONTHS" (g. 37): turn
the date disk to display the next two months of use. Press
;
37 38
Please note
IThe lter lasts about two months if the appliance is used nor-
mally. If the coee machine is left unused with the lter in-
stalled, it will last a maximum of 3 weeks.
5. "RUN WATER INTO FILTER HOLE UNTIL IT COMES OUT" (g.
38): To activate the lter, run tap water through the hole
in the lter as shown in the gure until water comes out
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM370.70 - Dinamica Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM370.70 - Dinamica Plus in the language / languages: English as an attachment in your email.

The manual is 10.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM370.70 - Dinamica Plus

DeLonghi ECAM370.70 - Dinamica Plus User Manual - German - 28 pages

DeLonghi ECAM370.70 - Dinamica Plus User Manual - Dutch - 140 pages

DeLonghi ECAM370.70 - Dinamica Plus User Manual - Danish - 140 pages

DeLonghi ECAM370.70 - Dinamica Plus User Manual - French, Italian - 48 pages

DeLonghi ECAM370.70 - Dinamica Plus User Manual - Portuguese - 140 pages

DeLonghi ECAM370.70 - Dinamica Plus User Manual - Swedish - 140 pages

DeLonghi ECAM370.70 - Dinamica Plus User Manual - Turkish, Spanish, Finnish - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info