532862
20
Zoom out
Zoom in
Previous page
1/25
Next page
19
gh with clean water. Remove the water tank,
empty, rinse under running water, fill with
clean water and replace. “Rinsing” is displa-
yed. “Rinsing... Confirm?” is displayed.
8. Empty the container used to collect the de-
scaler solution and replace it empty under
the cappuccino maker.
9. Press the button to start rinsing. Hot
water flows out of the spout and the messa-
ge “Rinsing...” is displayed.
10. When the water tank is completely empty,
Rinsing complete Confirm?” is displayed.
11. Press the button.
12. Insert the filter (if it was present) in the tank,
fill the water tank again and the appliance is
ready for use.
SETTING WATER HARDNESS
      
period of time established according to wa-
ter hardness. The machine is factory set for a
hardness value of 4. The machine can also be
programmed according to the hardness of the
mains water in the various regions so that the
machine needs to be descaled less often.
Measuring water hardness
1. Remove the “TOTAL HARDNESS TEST” indi-
cator paper attached to this manual from its
pack.
2. Immerse the paper completely in a glass of
water for one second.
3. Remove the paper from the water and shake
lightly.
After about a minute, 1, 2, 3, or 4 red squares
form, depending on the hardness of the wa-
ter. Each square corresponds to one level.
soft water l
slightly hard water
ll
hard water lll
very hard water
llll
Set water hardness
1. Press the P button to enter the menu.
2. Turn the selection knob to select “ Water
hardness “.
3. Confirm the selection by pressing the
button.
4. Turn the selection knob and set the level
shown by the indicator paper (see previous
paragraph).
5. Press the button to confirm the set-
ting.
6. Press the button to exit the menu.
The machine is now reprogrammed with the new
water hardness setting.
WATER SOFTENER FILTER
Certain models are fitted with a water softener
filter. If this is not the case with your model, you
are recommended to purchase one from De’Lon-
ghi Customer Services.
To use the filter correctly, follow the instructions
below.
Installing the filter
1. Remove the filter from the packaging.
2. Turn the date indicator disk (see fig. 30) until
the next 2 months of use are displayed.
Please note
The filter lasts about two months if the appliance
is used normally. If the coffee maker is left unu-
sed with the filter installed, it will last a maximum
of three weeks.
3. Remove the tank from the appliance and fill
with water.
4. Insert the filter in the water tank and immerse
it completely for ten or so seconds, sloping it
to enable the air bubbles to escape (fig. 31).
5. Insert the filter in the filter housing (fig. 32A)
and press as far as it will go.
6. Close the tank with the lid (fig. 32B), then
replace the tank in the machine.
When you install the filter, you must notify the
appliance of its presence.
7. Press the P button to enter the menu;
8. Turn the selection knob (fig. 8) until “Install
filter” is displayed;
9. Press the button;
10. The message “Activate?” is displayed.
11. Press the button to confirm the selec-
tion. “ Hot water Confirm?” is displayed.
12. Position a container with a minimum capaci-
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM23.450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM23.450 in the language / languages: English as an attachment in your email.

The manual is 6,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM23.450

DeLonghi ECAM23.450 User Manual - English - 25 pages

DeLonghi ECAM23.450 User Manual - German - 27 pages

DeLonghi ECAM23.450 User Manual - Dutch, Danish, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish, All languages - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info