605152
11
Zoom out
Zoom in
Previous page
1/15
Next page
16
You should use De’Longhi descaler only. Using unsuitable
descaler and/or performing descaling incorrectly may re-
sult in faults not covered by the manufacturer’s guarantee.
1. Turn the appliance on and wait until it is ready for use.
2. Empty the drip tray (A17) and grounds container (A13) and
put both back in the machine.
3. Empty the water tank (A9) completely and remove the
water softener lter (C4), if present.
4. Pour the descaler (C3) into the tank up to level A (corre-
sponding to a 100 ml pack) marked on the back of the tank,
then add a litre of water up to level B (g. 32) and put the
water tank back in the appliance.
1,8 l
36
. Place a container with a
minimum capacity of 1.8
litres under the cappucci-
no maker (A18) and cof-
fee spouts (A12) (g. 36).
6. Wait for the coee lights
to come on steadily.
7. Press and hold the
button (B5) for
at least 5 seconds to con-
rm that you have added
the solution and begin
the descaling procedure. The light in the button comes
on steadily to indicate that the descaling programme has
begun.
8. The light ashes to indicate the hot water/steam dial
(A19) must be turned to the I position.
Important! Danger of burns
Hot water containing acid ows from the cappuccino maker and
coee spouts. Take care to avoid contact with splashes of this
solution.
9. When the dial has been turned to the l position, the des-
cale programme starts and the descaler liquid comes out of
the cappuccino maker and coee spouts. A series of rinses
and pauses are performed automatically to remove all the
scale residues inside the coee machine.
After about 25 minutes, descaling stops and the and
lights ash on the control panel. Turn the hot water/steam dial
to the 0 position.
10. The appliance is now ready for rinsing through with clean
water. Empty the container used to collect the descaler
solution. Extract the water tank, empty, rinse under run-
ning water, ll with fresh water up to the MAX level and
put back in the appliance: the light ashes.
11. Place the container used to collect the descaler solution
empty under the cappuccino maker and coee spouts (g.
36).
12. Turn the hot water/steam dial to the I position to begin
rinsing. Hot water is delivered rst from the cappuccino
maker, to continue and end with the coee spouts.
13. When the water tank is completely empty, the and
lights ash on the control panel. Turn the hot water/
steam dial to the 0 position.
14. Empty the container used to collect the rinsing water. Re-
move the water tank, replace the water softener lter (if
removed previously), ll the tank up to the MAX level with
cold water and insert in the appliance. The steam
light ashes.
15. Place the container used to collect the rinsing water empty
under the cappuccino maker;
16. Turn the hot water/steam dial to the I position. Rinsing
continues from the cappuccino maker only.
17. When it nishes, the steam light ashes on the con-
trol panel. Turn the hot water/steam dial to the 0 position.
18. Top up the water tank with fresh water to the MAX level
and put back in the machine.
Descaling is complete.
Please note!
If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle.
After descaling, it is normal for the grounds container
(A13) to contain water.
16. SETTING WATER HARDNESS
Descaling is necessary after a period of operation established
according to the water hardness set.
The machine is set by default for a hardness value of 4. The ma-
chine can also be programmed according to the hardness of the
mains water in the various regions so that the machine needs to
be descaled less often.
16.1 Measuring water hardness
1. Remove the TOTAL HARDNESS TEST” indicator paper (C1)
from its pack (attached to the English instructions).
2. Immerse the paper completely in a glass of water for one
second.
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. Each square corresponds to
one level.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM20.110.B - Magnifica S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM20.110.B - Magnifica S in the language / languages: English as an attachment in your email.

The manual is 1.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM20.110.B - Magnifica S

DeLonghi ECAM20.110.B - Magnifica S User Manual - English - 2 pages

DeLonghi ECAM20.110.B - Magnifica S User Manual - German - 14 pages

DeLonghi ECAM20.110.B - Magnifica S User Manual - Dutch - 14 pages

DeLonghi ECAM20.110.B - Magnifica S User Manual - French - 13 pages

DeLonghi ECAM20.110.B - Magnifica S User Manual - Spanish - 15 pages

DeLonghi ECAM20.110.B - Magnifica S Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info