562578
16
Zoom out
Zoom in
Previous page
1/25
Next page
15
Programming the quantity of coee and milk
in the cup for the CAPPUCCINO, FLAT WHITE and
LATTE buttons
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coee spouts and milk spout.
2. Select the desired froth dial position for the drink type to
be programmed.
3. Press and hold one of the function buttons until the name
of the hot drink and the message “PROGRAM MILK” is
displayed.
4. Release the button. The appliance starts delivering milk.
5. Once the required quantity of milk has been delivered into
the cup, press the button again.
6. The appliance stops delivering milk and, if included in the
drink, after a few seconds the coee is delivered into the
cup: the name of the hot drink and “PROGRAM COFFEE” is
displayed.
7. Once the required quantity of coee has been delivered
into the cup, press the button again. Coee delivery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
Programming the quantity of coee and milk in
the cup for the MILK MENU button drinks
The appliance is set by default to automatically deliver standard
quantities.
To change these quantities, proceed as follows:
1. Press the MILK MENU button.
2. Press < or > until the required drink is displayed (MILK,
CAFFELATTE, ESPRESSO MACCHIATO or MY MILK).
3. Hold the OK button until the name of the drink and “PRO-
GRAM MILK” are displayed.
4. Release the button. The appliance starts delivering milk.
5. Once the required quantity of milk has been delivered into
the cup, press the OK button.
6. The appliance stops delivering milk and, if included in the
drink, after a few seconds the coee is delivered into the
cup: the name of the hot drink and “PROGRAM COFFEE” is
displayed.
7. Once the required quantity of coee has been delivered
into the cup, press the OK button again. Coee delivery
stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
DELIVERING HOT WATER AND STEAM
Important! Danger of burns.
Never leave the machine unsupervised while delivering hot
water or steam.
The spout becomes hot. Hold by the handle only.
Please note!
If “Energy saving mode is active, you may have to wait a few
seconds before the hot water or steam is delivered.
Delivering hot water
1. Make sure the hot water spout is attached correctly (g. 7).
2. Place a container under the spout (as close as possible to
avoid splashes).
3. Press the button (g. 3). “HOT WATER” is displayed,
together with a progress bar which lls gradually as pre-
paration proceeds.
4. The machine delivers 250 ml of hot water, then delivery
stops automatically. To interrupt delivery of hot water ma-
nually, press the button again.
Changing the quantity of water delivered
automatically
The machine is set by default to automatically deliver 250 ml
of hot water.
To modify these quantities, proceed as follows:
1. Position a container under the spout.
2. Press and hold the button until “Hot water Program
quantity” is displayed, then release the button.
3. When the hot water in the cup reaches the required level,
press the button again.
The machine is now reprogrammed with the new quantity.
Delivering steam
1. Make sure the hot water spout is attached correctly (g. 7).
2. Fill a container with the liquid to be heated/frothed and
immerse the spout/traditional frother (D5) in the liquid.
3. Press the button: after a few seconds, steam comes
out of the traditional frother and heats the liquid; “STEAM”
is displayed.
4. When the required temperature is obtained, interrupt
steam delivery by pressing the button. (You should not
discharge steam for more than 3 minutes at a time).
Important!
Always stop steam delivery before extracting the container con-
taining the liquid to avoid burns from splashes.
16


Need help? Post your question in this forum.

Forumrules
1

Forum

delonghi-ecam-45.760.w---eletta-cappuccino-top

Reset search

  • No coffee is coming out and the water is going to the drip tray and the ground beans to the bottom container Submitted on 26-8-2023 at 10:41

    Reply Report abuse
  • Am aplecat pe o parte ma?ina de cafea pentru a goli boabele de cafea.
    Acum arata mesajul Introduce?i rezervorul de za?. Submitted on 25-12-2020 at 15:29

    Reply Report abuse
  • The milk/ steam frother seems to be blocked. When I descale machine nothing comes out of spout.
    Any suggestions?
    Thank you Submitted on 13-6-2020 at 17:56

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP in the language / languages: English as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP

DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP User Manual - German - 27 pages

DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info