562578
13
Zoom out
Zoom in
Previous page
1/25
Next page
12
MAKING COFFEE
Selecting the coee taste
The appliance is set by default to make coee with a standard
taste. You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the button (g. 11) repea-
tedly until the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee. To select the quantity of coee, press the
button (g. 12) until the message corresponding to the required
quantity of coee is displayed:
Coee selected Quantity in cup (ml)
MY COFFEE Programmable:
from 20 to 180
SHORT
40
STANDARD
60
LONG
90
EXTRA LONG COFFEE
120
Customising the “my coee” quantity
The appliance is set by default to automatically deliver 30 ml of
“MY COFFEE”. To modify this quantity, proceed as follows:
1. Place a cup under the coee spouts (g. 13).
2. Press the button (g. 12) until “MY COFFEE” is
displayed.
3. Keep the button (g. 17) pressed until the message
“1 MY COFFEE Program quantity” is displayed and coee
delivery begins. Release the button.
4. As soon as the coee in the cup reaches the required level,
press the button (g. 17) again.
The quantity of coee in the cup set has now been programmed.
The programmed quantity is doubled for the button.
Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and with not enough crema’ or delivery
is too slow (a drop at a time) and the coee is very strong, this
can be corrected by adjusting the grinding adjustment dial (g.
14).
Please note!
The grinding adjustment dial must only be turned when the
coee mill is in operation.
If the coee is delivered too slowly or
not at all, turn one click clockwise to-
wards “7”.
For fuller bodied coee with more
crema, turn one click anticlockwise to-
wards “1” (do not turn more than one
click at a time otherwise the coee could
be delivered a drop at a time). These adjustments will only be
evident after at least 2 cups of coee have been delivered. If
this adjustment does not obtain the desired result, turn the dial
another click.
Tips for a hotter coee
For hotter coee, you should:
perform a rinse cycle, selecting the “Rinsing” function in
the settings menu (page 10).
warm the cups by rinsing them with hot water (using the
hot water function);
increase the coee temperature in the settings menu
(page 11).
Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Fill the container with coee beans (g. 15).
2. Place under the coee spouts:
- 1 cup, if you want to make 1 coee (g. 13);
- 2 cups if you want 2 coees (g. 16).
3. Lower the spout as near as possible to the cups (g. 16).
This makes a creamier coee.
4. Press the button corresponding to the number of coees
required (1 cup or 2 cups ).
5. Preparation begins. The amount of coee selected is di-
splayed together with a progress bar which gradually lls
as preparation progresses.
Please note:
While the machine is making coee, delivery can be inter-
rupted at any moment by pressing any button.
At the end of delivery and within 3 seconds, press and hold
one of the coee buttons to increase the quantity of coee
in the cup ( or ) (g. 17).
Once the coee has been made, the appliance is ready to make
the next drink.
13


Need help? Post your question in this forum.

Forumrules
1

Forum

delonghi-ecam-45.760.w---eletta-cappuccino-top

Reset search

  • No coffee is coming out and the water is going to the drip tray and the ground beans to the bottom container Submitted on 26-8-2023 at 10:41

    Reply Report abuse
  • Am aplecat pe o parte ma?ina de cafea pentru a goli boabele de cafea.
    Acum arata mesajul Introduce?i rezervorul de za?. Submitted on 25-12-2020 at 15:29

    Reply Report abuse
  • The milk/ steam frother seems to be blocked. When I descale machine nothing comes out of spout.
    Any suggestions?
    Thank you Submitted on 13-6-2020 at 17:56

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP in the language / languages: English as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP

DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP User Manual - German - 27 pages

DeLonghi ECAM 45.760.W - ELETTA CAPPUCCINO TOP User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info