562609
20
Zoom out
Zoom in
Previous page
1/25
Next page
19
11. Empty the container used to collect the descaler solution
and replace it empty under the hot water spout.
12. Press the OK button to start rinsing. Hot water ows out
of the spout and the message “RINSING, Please wait” is
displayed.
13. When the water tank is completely empty, the message
“Rinsing complete, Press OK” is displayed.
14. Press the OK button.
15. “Heating up Please wait” is displayed, at the end of which
the machine will be ready for use.
SETTING WATER HARDNESS
The DESCALE message is displayed after a period of time establi-
shed according to water hardness.
The machine is set by default for a hardness value of 4.
The machine can also be programmed according to the hardness
of the mains water in the various regions so that the machine
needs to be descaled less often.
Measuring water hardness
1. Remove the “TOTAL HARDNESS TEST” indicator paper from
its pack (attached to the English instructions).
2. Immerse the paper completely in a glass of water for one
second.
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. Each square corresponds to
one level.
Setting water hardness
1. Press the MENU/ESC button to enter the menu.
2. Press < or > to select “Water hardness”.
3. Press the OK button to conrm the selection.
4. Press < or > and set the hardness level as measured by the
indicator strip (see the g. in the previous paragraph).
5. Press the OK button to conrm the setting.
6. Press the MENU/ESC button to exit the menu.
The machine is now reprogrammed with the new water
hardness setting.
WATER SOFTENER FILTER
Certain models are tted with a water softener lter. If this is not
the case with your model, you are recommended to purchase
one from De’Longhi Customer Services.
To use the lter correctly, follow the instructions below.
Installing the lter
44
1. Remove the lter from
the packaging.
2. Turn the date indicator
disk (g. 44) until the
next two months of use
are displayed.
Please note
The lter lasts about two
months if the appliance is used
normally. If the coee machine
is left unused with the lter in-
stalled, it will last a maximum of three weeks.
3. To activate the lter, run tap water through the hole in the
lter as shown in the gure until water comes out of the
openings at the side for more than a minute (g. 45).
4645
0,5 L
4. Extract the tank from the appliance and ll with water.
5. Insert the lter in the water tank and immerse it comple-
tely for about ten minutes, sloping it and pressing it lightly
to enable the air bubbles to escape (g. 46).
6. Insert the lter in the lter housing (g. 47A) and press as
far as it will go.
7. Close the tank with the lid (g. 47B), then put the tank
back in the machine.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 45.366 - ELETTA CAPPUCCINO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 45.366 - ELETTA CAPPUCCINO in the language / languages: English as an attachment in your email.

The manual is 2.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 45.366 - ELETTA CAPPUCCINO

DeLonghi ECAM 45.366 - ELETTA CAPPUCCINO User Manual - German - 27 pages

DeLonghi ECAM 45.366 - ELETTA CAPPUCCINO User Manual - Dutch - 17 pages

DeLonghi ECAM 45.366 - ELETTA CAPPUCCINO User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info