687064
7
Zoom out
Zoom in
Previous page
1/20
Next page
12
8.1 Filling and attaching the milk container
1. Remove the lid (E2) (g. 14);
2. Fill the milk container (E3) with a sucient quantity of milk,
not exceeding the MAX level marked on the container (g.
15). Each mark on the side of the container corresponds to
about 100 ml of milk;
Please note!
For a denser more even froth, you must use skimmed or
partially skimmed milk at refrigerator temperature (about
5°C).
If "Energy Saving" mode is enabled, you may have to wait a
few seconds before the beverage is delivered.
3. Make sure the milk intake tube (E4) is correctly inserted in
the bottom of the milk container lid (g. 16);
4. Place the lid back on the milk container;
5. Remove the hot water spout (D6);
6. Attach the milk container (E) to the connection nozzle (A8)
and push as far as it will go (g. 17). The machine emits a
beep (if the beep function is enabled);
7. Place a suciently large cup under the coee spouts (A9)
and the frothed milk spout (E5). Adjust the length of the
milk spout. To move it nearer the cup, simply pull it down-
wards (g. 18).
8. Follow the instructions below for each function.
8.2 Adjusting the amount of froth
Turn the froth adjustment dial (E1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coees.
Dial
position
Description Recommended for
NO FROTH HOT MILK (not frothed) /
CAFFELATTE
MIN. FROTH latte macchiato/
FLAT WHITE
MAX. FROTH CAPPUCCINO / CAPPUCCI
NO+ / CAPPUCCINO MIX
/ ESPRESSO MACCHIATO /
HOT MILK (frothed)
8.3 Making cappuccinos and milk-based coees
automatically
1. Fill the milk container (E) and attach it as described above.
2. Select the required beverage:
CAPPUCCINO
LATTE MACCHIATO
HOT MILK
CAPPUCCINO+
CAPPUCCINO MIX
CAFFELATTE
FLAT WHITE
ESPRESSO MACCHIATO
3. A message on the display instructs you to turn the froth
adjustment dial (E1) according to the froth required by the
original recipe. Turn the dial on the milk container lid.
4. After a few seconds, preparation begins automatically and
an image of the selected beverage appears on the display,
together with a progress bar which gradually lls as prepa-
ration progresses.
Once the coee has been delivered, the machine will be ready
for further use.
Please note: general indications when preparing all milk-
based beverages
: press to interrupt preparation completely
and go back to the homepage.
: press to interrupt milk or coee delivery and
move on to the next delivery (if applicable) to complete the
beverage.
Preparation of each coee can be customised (see sections
"11. Customising the beverages " and "12. Memorising
your own user prole").
Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
8.4 Cleaning the milk container after use
Each time you use a milk function, "TURN MILK FROTH ADJUST-
MENT DIAL" "TO CLEAN POSITION" appears on the display and
the milk frother lid must be cleaned:
1. Leave the milk container (E) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout;
3. Turn the froth adjustment dial (E1) to "CLEAN" (g. 19).
"CLEANING UNDERWAY" "RECIPIENT UNDER SPOUT" ap-
pears on the display together with a bar which gradually
lls as cleaning progresses (g. 20). Steam mixed with hot
water comes out of the frothed milk spout. Cleaning stops
automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the hot water
connection nozzle (A8) with a sponge (g. 21).
Please note!
To prepare a number of cappuccinos and milk based cof-
fees, clean the milk container after you have prepared
the last beverage only. To proceed with making the next
beverages, when the CLEAN message is displayed, press
.
7


Need help? Post your question in this forum.

Forumrules
1

Forum

delonghi-ecam-370.95-t-dinamica-plus

Reset search

  • Coffee with preground beans
    How to proceed further after putting putting the coffee powder as there is no ok button Submitted on 13-4-2021 at 09:54

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 370.95 T Dinamica Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 370.95 T Dinamica Plus in the language / languages: English as an attachment in your email.

The manual is 8.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 370.95 T Dinamica Plus

DeLonghi ECAM 370.95 T Dinamica Plus User Manual - German - 22 pages

DeLonghi ECAM 370.95 T Dinamica Plus User Manual - Dutch, Danish - 386 pages

DeLonghi ECAM 370.95 T Dinamica Plus User Manual - French - 21 pages

DeLonghi ECAM 370.95 T Dinamica Plus User Manual - Polish, Portuguese, Swedish, Turkish, Spanish, Finnish - 386 pages

DeLonghi ECAM 370.95 T Dinamica Plus User Manual - All languages - 386 pages

DeLonghi ECAM 370.95 T Dinamica Plus Quick start guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info