562603

DeLonghi ECAM 28.466.M - PRIMADONNA S DE LUXE Manual

10
Zoom out
Zoom in
Previous page
1/20
Next page
15
5. Remove the hot water spout (C6) from the connection noz-
zle by pressing the release button (C7);
6. Attach the container to the connection nozzle (A13 - g.
21) and push as far as it will go. The appliance emits a beep
(if the beep function is enabled);
7. Place a suciently large cup under the coee spouts (A12)
and frothed milk spout (D5). Adjust the length of the milk
spout. To move it nearer the cup, simply pull it downwards
(g. 22);
8. Follow the instructions below for each function.
10.2 Adjusting the amount of froth
Turn the froth adjustment dial (D1) on the milk container lid
(D2) to adjust the amount of froth on the milk delivered while
making cappuccino and milk-based coee.
Dial
position
Description Recommended for…
No froth CAFFELATTE/MILK HOT
MILK
Min. froth MACCHIATO
Max. froth
CAPPUCCINO/MILK FROTHED
MILK
10.3 Making cappuccino and milk based coees
automatically
The CAFFELATTE, CAPPUCCINO, MACCHIATO and MILK buttons on
the control panel (B) enable these drinks to be prepared auto-
matically. Proceed as follows:
1. Fill the milk container (D) and attach it as described above;
2. Turn the froth adjustment dial (D1) on the milk container
lid (D3) to the position corresponding to the required froth;
3. Press the button corresponding to the required drink. The
name of the drink selected appears on the display (B4)
together with a progress bar which gradually lls as prepa-
ration progresses;
4. After a few seconds, frothed milk is delivered from the milk
spout (D5) into the cup below. For drinks with coee, the
machine automatically makes the coee after delivering
the milk.
Please note!
• If you want to interrupt preparation during delivery, press
the corresponding button.
• At the end of delivery, to increase the quantity of milk or
coee in the cup, just press and hold (within 3 seconds) the
button corresponding to the drink being made.
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
10.4 Cleaning the milk frother using the CLEAN
function
Important! Danger of burns
When cleaning the internal tubes of the milk container (D), a lit-
tle hot water and steam leak out of the frothed milk spout (D5).
Avoid contact with splashes of water.
“SET DIAL TO CLEAN” appears on the display (B4) each time you
use a milk function. To eliminate all milk residues, proceed as
follows:
1. Leave the milk container in the machine (you do not need
to empty it);
2. Place a cup or other recipient under the frothed milk spout.
3. Turn the froth adjustment dial (D1) to “CLEAN” (g. 23). A
progress bar appears and gradually lls as the operation
proceeds together with “Cleaning underway”. Cleaning
stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A13) with a sponge.
Please note!
• To prepare a number of cappuccinos or milk based coees,
clean the milk container after you have prepared the last
drink only.
• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up.
10.5 Programming the quantity of coee
and milk in the cup for the CAFFELATTE,
CAPPUCCINO, MACCHIATO and MILK buttons.
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coee spouts (A12) and milk spout
(D5);
2. Press and hold one of the function buttons until the mes-
sage “PROGRAM MILK Program quantity” appears on the
display (B4);
3. Release the button. The appliance starts delivering milk;
4. Once the required quantity of milk has been delivered into
the cup, press the button again;
5. The appliance stops delivering milk and, if required for the
drink being prepared, after a few seconds the coee is de-
livered into the cup. “PROGRAM COFFEE Program quantity”
is displayed;
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 28.466.M - PRIMADONNA S DE LUXE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 28.466.M - PRIMADONNA S DE LUXE in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 28.466.M - PRIMADONNA S DE LUXE

DeLonghi ECAM 28.466.M - PRIMADONNA S DE LUXE User Manual - German - 27 pages

DeLonghi ECAM 28.466.M - PRIMADONNA S DE LUXE User Manual - Dutch - 18 pages

DeLonghi ECAM 28.466.M - PRIMADONNA S DE LUXE Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info