562571
7
Zoom out
Zoom in
Previous page
1/20
Next page
12
4. Press the CAPPUCCINO or MILK button until the required
operating time (15 or 30 minutes, or 1, 2 or 3 hours) is
displayed;
5. Press the
button to conrm;
6. Press the MENU/ESC button to exit the menu.
Auto-o is programmed.
8.8 Cup warmer
This function enables or disables the cup warmer (A11). Proceed
as follows:
1. Press the MENU/ESC button (B3) to enter the menu;
2. Press the CAPPUCCINO (B9) or MILK (B11) button (g. 8)
until “Cup warmer” appears on the display (B4);
3. Press the button (B5 - g. 5). “Disable?” is dis-
played (or “Enable?” if the function has been disabled);
4. Press the button to disable (or enable) the
function.
5. Press the MENU/ESC button to exit the menu.
Warming the cups keeps the coee hot.
8.9 Energy saving
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable (or enable) energy saving, proceed as follows:
1. Press the MENU/ESC button (B3) to enter the menu;
2. Press the CAPPUCCINO (B9) or MILK (B11) (g. 8) button
(g. 8) until “Energy saving” appears on the display (B4);
3. Press the
button (B5 - g. 5). “Disable?” is dis-
played (or “Enable?” if the function has been disabled);
4. Press the
button to disable (or enable) energy
saving mode;
5. Press the MENU/ESC button to exit the menu.
When the function is active, if the machine is not used for some
time, “Energy saving is displayed.
Please note!
When in energy saving mode, a few seconds elapse before
the rst coee, cappuccino or milk based coee is delivered
as the appliance must heat up again.
To prepare any drink, press any button to exit energy sav-
ing, then press the button corresponding to the drink you
want to make.
If the milk container (D) is inserted, “Energy saving” cannot
be activated.
8.10 Setting the temperature
To modify the temperature of the water used to make the coee,
proceed as follows:
1. Press the MENU/ESC button (B3) to enter the menu;
2. Press the CAPPUCCINO (B9) o MILK (B11) button (g. 8)
until “Set temperature appears on the display (B4);
3. Press the
button (B5 - g. 5);
4. Press the MILK or CAPPUCCINO button until the required
temperature (= low; ●●●●=high) is displayed;
5. Press the
button to conrm;
6. Press the MENU/ESC button to exit the menu.
8.11 Setting water hardness
For instructions on setting water hardness, see section “14. Set-
ting water hardness”.
8.12 Beep
This enables or disables the beep emitted by the machine each
time the buttons are pressed or an accessory is inserted/re-
moved. The beep is active by default. To disable or re-enable the
beep, proceed as follows:
1. Press the MENU/ESC button (B3) to enter the menu;
2. Press the CAPPUCCINO (B9) o MILK (B11) button (g. 8)
until “Beep” appears on the display (B4);
3. Press the
button (B5 - g. 5). “Disable?” or “Ena-
ble?” is displayed;
4. Press the button to enable or disable the beep;
5. Press the MENU/ESC button to exit the menu.
8.13 Setting the language
To modify the language of the display (B4), proceed as follows:
1. Press the MENU/ESC button (B3) to enter the menu;
2. Press the CAPPUCCINO (B9) or MILK (B11) button (g. 8)
until “Set language” appears on the display;
3. Press the button (B5 - g. 5);
4. Press the CAPPUCCINO or MILK button until the required
language is displayed;
5. Press the button to conrm;
6. A message conrming the language installed is displayed;
7. Press the MENU/ESC button to exit the menu.
8.14 Cup lighting
This function enables or disables the cup lights. The lights are
enabled by default.
The lighting comes on each time coee, cappuccino or milk
based coee is made and during each rinsing cycle.
To disable or re-enable this function, proceed as follows:
1. Press the MENU/ESC button (B3) to enter the menu;
2. Press the CAPPUCCINO (B9) or MILK (B11) button (g. 8)
until “Cup lighting appears on the display (B4);
3. Press the button (B5 - g. 5). “Disable?” or “Ena-
ble?” is displayed;
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 28.465.M - PRIMADONNA S DE LUXE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 28.465.M - PRIMADONNA S DE LUXE in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 28.465.M - PRIMADONNA S DE LUXE

DeLonghi ECAM 28.465.M - PRIMADONNA S DE LUXE User Manual - German - 27 pages

DeLonghi ECAM 28.465.M - PRIMADONNA S DE LUXE User Manual - Dutch - 18 pages

DeLonghi ECAM 28.465.M - PRIMADONNA S DE LUXE User Manual - French - 18 pages

DeLonghi ECAM 28.465.M - PRIMADONNA S DE LUXE Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info