562572
19
Zoom out
Zoom in
Previous page
1/22
Next page
18
5. Press the button to conrm the setting.
6. Press the MENU/ESC button to exit the menu.
The machine is now reprogrammed with the new water
hardness setting
WATER FILTER
Certain models are tted with a water softener lter. If this
is not the case with your model, you are recommended to
purchase one from De’Longhi
Customer Experience.
To use the lter correctly,
follow the instructions
below.
Installing the lter
1. Remove the lter from
the packaging.
2. Turn the date indicator
disk (see g. 33) until
the next 2 months of
use are displayed.
Please note
The lter lasts about two
months if the appliance is
used normally. If the coee
maker is left unused with the
lter installed, it will last a
maximum of three weeks.
3. Remove the tank from
the appliance and ll
with water.
4. Insert the lter in the
water tank and immerse
it completely for ten or
so seconds, sloping it to
enable the air bubbles
to escape (g. 34).
5. Insert the lter in the
lter housing (g. 35A)
and press as far as it will
go.
6. Close the tank with the
lid (g. 35B), then replace the tank in the machine.
When you install the lter, you must notify the appliance of its
presence.
7. Press the MENU/ESC button to enter the menu;
8. Press the MILK or CAPPUCCINO button (g. 8) until
“Install lter” is displayed;
9. Press the button;
Remove the water tank, empty, rinse under running
water, ll with clean water and replace.
“Rinsing... Conrm?” is displayed.
8. Empty the container used to collect the descaler solution
and replace it empty under the hot water spout.
9. Press the button to start rinsing.
Hot water ows out of the spout and the message
“Rinsing... is displayed.
10. When the water tank is completely empty, “ Rinsing
Complete Conrm?” is displayed.
11. Press the button.
12. Insert the lter (if present) in the tank (see section
“Installing the lter” on page 18), ll the water tank again
and the appliance is ready for use.
SETTING THE WATER HARDNESS
The DESCALE message is displayed after a period of time
according to water hardness.
The machine is factory set for a hardness value of 4.
The machine can also be programmed according to the
hardness of the mains water in the various regions so that the
machine needs to be descaled less often.
Measuring water hardness
1. Remove the “total hardness test” indicator paper attached
to this manual from its pack.
2. Immerse the paper completely in a glass of water for one
second.
3. Remove the paper from the water and shake lightly.
After about a minute, 1, 2, 3, or 4 red squares form,
depending on the hardness of the water. each square
corresponds to one level.
soft water
slightly hard water
●●
hard water●●●
very hard water
●●●●
Set water hardness
1. Press the MENU/ESC button to enter the menu.
2. Press the MILK or CAPPUCCINO button to select “Water
Hardness”.
3. Conrm the selection by pressing the button.
4. Press the MILK or CAPPUCCINO button and set the
hardness shown by the indicator paper (see previous
section).
33
34
35A
35B
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 26.455.B - PRIMADONNA S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 26.455.B - PRIMADONNA S in the language / languages: English as an attachment in your email.

The manual is 9,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 26.455.B - PRIMADONNA S

DeLonghi ECAM 26.455.B - PRIMADONNA S User Manual - German - 25 pages

DeLonghi ECAM 26.455.B - PRIMADONNA S Quick start guide - Dutch - 25 pages

DeLonghi ECAM 26.455.B - PRIMADONNA S User Manual - Dutch - 18 pages

DeLonghi ECAM 26.455.B - PRIMADONNA S Quick start guide - Danish - 25 pages

DeLonghi ECAM 26.455.B - PRIMADONNA S User Manual - French - 17 pages

DeLonghi ECAM 26.455.B - PRIMADONNA S Quick start guide - Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info