528243
21
Zoom out
Zoom in
Previous page
1/22
Next page
20
DISPLAYED MESSAGES
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
FILL TANK
Insucientwaterinthetank. Fill the tank with water and/or insert it correctly, pushing it
as far as it will go until it clicks into place.
EMPTY GROUNDS CONTAINER
The grounds container (A22) is full.
Empty the grounds container and drip tray, clean and replace
(g. 26).
Important: when removing the drip tray, the grounds contai-
ner must be emptied, even if it is not completely full.
If this is not done, when you make the next coees, the
grounds container may ll up more than expected and clog
the machine.
GROUND TOO FINE ADJUST
MILL
alternating with...
Insert water spout and press
OK
The grinding is too ne and the coee is delivered too slowly
or not at all.
Repeat coee delivery and turn the grinding adjustment
dial (g. 12) one click clockwise towards “7” while the coee
mill is in operation.
If after making at least 2 coees delivery is still too slow,
repeat the correction procedure, turning the grinding
adjustment dial another click (see the section “adjusting the
coee mill” on page 12).
INSERT GROUNDS CONTAINER
After cleaning, the grounds container has not been repla-
ced
Remove the drip tray and insert the grounds container.
ADD PREGROUNDCOFFEE
The “pre-ground coee” function has been selected without
placing any pre-ground coee in the funnel.
Place pre-ground coee in the funnel (g. 17) or deselect
the “pre-ground” function.
DESCALE!
The machine must be descaled. The descaling procedure described in the "descaling" section
(page 17) needs to be performed as soon as possible.
LESS COFFEE
Too much coee has been used.
Select a milder taste by pressing the button (g.
9) or reduce the quantity of pre-ground coee, if using the
pre-ground function.
FILL BEANS CONTAINER
The coee beans have run out. Fll the beans container (g. 13).
The pre-ground coee funnel is clogged. Clear the funnel with the help of a brush as described in the
section “Cleaning the pre-ground coee funnel”.
INSERT INFUSER ASSEMBLY
The infuser has not been replaced after cleaning. Insert the infuser as described in the section “cleaning the
infuser”.
INSERT TANK
The tank is not correctly in place.
Insert the tank correctly and press as far as it will go.
GENERAL ALARM
The inside of the appliance is very dirty. Clean the inside of the appliance thoroughly, as described in
the section “cleaning and maintenance”.
If the message is still displayed after cleaning, contact
De’Longhi Customer Experience.
EMPTY CIRCUIT FILL CIRCUIT
alternating with
Hot water press OK
The water circuit is empty Connect the water spout (D3) (g.6) and press OK to deliver
water from it, until it ows out normally.
REPLACE FILTER
The water lter is exhausted. Replace the lter or remove it as described in the section
“Water lter”.
Press CLEAN
Milk has been delivered recently and the tubes inside the
milk container must be cleaned.
Press the CLEAN button (g. 23) and keep it pressed until the
progress bar which appears on the display together with the
message “Cleaning underway “ is complete.
INSERT WATER SPOUT
The hot water spout is not inserted or is inserted incorrect-
ly.
Insert water spout (D3) as far as it will go.
INSERT MILK CONTAINER
The milk container is not inserted correctly. Insert the milk container as far as it will go (g. 21).
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 26.455 - PRIMADONNA S DE LUXE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 26.455 - PRIMADONNA S DE LUXE in the language / languages: English as an attachment in your email.

The manual is 9,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 26.455 - PRIMADONNA S DE LUXE

DeLonghi ECAM 26.455 - PRIMADONNA S DE LUXE User Manual - German - 25 pages

DeLonghi ECAM 26.455 - PRIMADONNA S DE LUXE Quick start guide - Dutch, Danish - 25 pages

DeLonghi ECAM 26.455 - PRIMADONNA S DE LUXE User Manual - French - 17 pages

DeLonghi ECAM 26.455 - PRIMADONNA S DE LUXE Quick start guide - Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info