562618
16
Zoom out
Zoom in
Previous page
1/16
Next page
21
TROUBLESHOOTING
Below is a list of some of the possible malfunctions�
If the problem cannot be resolved as described, contact Customer Services�
PROBLEM POSSIBLE CAUSE REMEDY
The coffee is not hot
The cups were not preheated� Warm the cups by rinsing them with hot
water (Please note you can use the hot water
function)�
The infuser has cooled down because 2/3
minutes have elapsed since the last coffee
was made�
Before making the coffee, warm the infuser by
pressing the button�
Low coffee temperature is set� In the menu, set a high coffee temperature�
The coffee is thin or
not creamy enough�
The coffee is ground too coarsely Turn the grinding adjustment knob one
click anticlockwise towards “1” while the
coffee mill is in operation (fig� 10)� Continue
one click at a time until coffee delivery is
satisfactory� The effect is only visible after
delivering two coffees (see “Adjusting coffee
mill”, page 12)�
The coffee is unsuitable� Use pre-ground coffee for espresso coffee
makers
The coffee is delivered
too slowly or a drop at
a time�
The coffee is ground too finely Turn the grinding adjustment knob one click
clockwise towards “7” while the coffee mill is
in operation (fig� 10)�
Continue one click at a time until coffee
delivery is satisfactory
The effect is only visible after delivering 2
coffees (see the section: “Adjusting the coffee
mill” on page 12)�
Coffee does not come
out of one of the
spouts�
The spouts are blocked� Clean the spouts with a toothpick�
The frothed milk has
large bubbles
The milk is not cold enough or is not semi-
skimmed�
You should ideally use skimmed or semi-
skimmed milk at refrigerator temperature
(about 5°C)� If the result is still disappointing,
try another brand of milk�
The milk is not frothed
Cappuccino maker dirty Clean as described in the section “Cleaning
the cappuccino maker after use” on page 31�
Steam delivery stops
A safety device stops steam delivery after 3
minutes�
Wait, then activate the steam function again�
The appliance does not
come on�
It is not plugged into the mains socket� Plug into the mains socket�
The main switch is in the 0 position� Place the main switch in the I position (fig� 1)�
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 24.210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 24.210 in the language / languages: English as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 24.210

DeLonghi ECAM 24.210 User Manual - English - 16 pages

DeLonghi ECAM 24.210 User Manual - German - 18 pages

DeLonghi ECAM 24.210 User Manual - Dutch - 17 pages

DeLonghi ECAM 24.210 User Manual - French - 18 pages

DeLonghi ECAM 24.210 Quick start guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info