784087
18
Zoom out
Zoom in
Previous page
1/22
Next page
17
8. Place an empty container with a minimum capacity of 1.5
litres under the hot water spout (g. 4).
Important! Danger di scottature
Hot water containing acid ows out of the hot water spout.
Avoid contact with splashes of water.
9. Press the button to conrm that you have added the
solution.
The message “Descale underway” is displayed.
The descale programme starts and the descaler liquid
comes out of the water spout.
The descale programme automatically performs a series
of rinses and pauses to remove limescale deposits from
inside the machine.
After about 30 minutes, the message “Rinsing” “INSERT FILTER”
(ifpresent),“FILLTANK”isdisplayed.
10. The appliance is now ready for rinsing through with clean
water. Extract the water tank, empty, rinse under running
water,llwithcleanwateruptotheMAXlevel,insertthe
lter (if removed previously) and put the water tank back
in the machine. “Rinsing Conrm?” is displayed.
11. Empty the container used to collect the descaler solution
and replace it empty under the cappuccino maker.
12. Press the button to start rinsing. Hot water ows
out of the spout and the message “Rinsing Please wait” is
displayed.
13. When the water tank is completely empty, the message
“Rinsing complete Conrm?” is displayed.
14. Press the button.
15. “Heating up Please wait” is displayed, at the end of which
the machine will be ready for use.
SETTING WATER HARDNESS
The DESCALE message is displayed after a period of time
established according to water hardness.
The machine is set by default for a hardness value of 4.
The machine can also be programmed according to the
hardness of the mains water in the various regions so that the
machine needs to be descaled less often.
Measuring water hardness
1. Remove the TOTAL HARDNESS TEST” indicator paper from
its pack (attached to the English instructions).
2. Immerse the paper completely in a glass of water for one
second.
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. Each square corresponds to
one level.
soft water
slightly hard water ●●
hard water ●●●
very hard water ●●●●
Setting water hardness
1. Press the P button to enter the menu.
2. Turn the selection dial to select “Water hardness”.
3. Press the button to conrm the selection.
4. Turn the selection dial and set the hardness level
as measured by the indicator paper (see previous
paragraph).
5. Press the button to conrm the setting.
6. Press the button to exit the menu.
The machine is now reprogrammed with the new water
hardness setting.
WATER SOFTENER FILTER
Certain models are tted with a water softener lter. If this
is not the case with your model, you are recommended to
purchase one from De’Longhi Customer Services.
To use the lter correctly, follow the instructions below.
Installing the lter
1. Remove the lter from the packaging.
2. Turn the date indicator disk (see g. 31) until the next two
months of use are displayed.
Please note
The lter lasts about two months if the appliance is used
normally. If the coee machine is left unused with the lter
installed, it will last a maximum of three weeks.
3. To activate the lter, run tap water through the hole in the
lter as shown in the gure until water comes out of the
openings at the side for more than a minute (g. 32).
4. Extract the tank from
the appliance and ll
with water.
5. Insert the lter in
the water tank and
immerse it completely
for about ten minutes,
sloping it to enable the
air bubbles to escape.
6. Insert the lter in the lter housing and press as far as it
will go.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 23.463 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 23.463 in the language / languages: English as an attachment in your email.

The manual is 6.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 23.463

DeLonghi ECAM 23.463 User Manual - German - 24 pages

DeLonghi ECAM 23.463 User Manual - Dutch - 23 pages

DeLonghi ECAM 23.463 User Manual - French - 17 pages

DeLonghi ECAM 23.463 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info