562584
19
Zoom out
Zoom in
Previous page
1/22
Next page
18
Removing the lter
If you want to use the appliance without the lter, you must
remove it and notify the appliance of its removal.
Proceed as follows:
1. Extract the tank and exhausted lter;
2. Press the P button to enter the menu;
3. Turn the selection dial (g. 8) until “Install lter*” is
displayed;
4. Press the button;
5. “Disable?” is displayed;
6. Press the button to conrm and the button to
exit the menu.
TECHNICAL DATA
Tensione: 220-240V~50/60Hzmax.10A
Absorbed power: 1450W
Pressure: 15 bar
Max. water tank capacity: 1,8 l
Size LxHxD: 238x351x430 mm
Cable length: 1,75 m
Weight: 9,7 kg
Coee beans container capacity: 250 g
The appliance complies with the following EC
directives:
• EuropeanStand-byRegulation1275/2008;
• Low Voltage Directive 2006/95/EC and subsequent
amendments;
• EMC Directive 2004/108/EC and subsequent
amendments;
• Materialsandaccessoriescomingintocontactwithfood
conform to EC regulation 1935/2004.
DISPOSAL
In compliance with European directive 2002/96/EC,
the appliance must not be disposed of with
household waste, but taken to an authorised waste
separation and recycling centre.
7. Close the tank with the
lid, then put the tank
back in the machine.
When you install the lter,
you must notify the appliance
of its presence.
8. Press the P button to
enter the menu;
9. Turn the selection dial
(g. 8) until “Install
lter” is displayed;
10. Press the button;
11. “Enable?” is displayed;
12. Press the button to conrm the selection. “Hot water
Conrm?” is displayed;
13. Position a container under the hot water spout (min.
capacity: 500 ml);
14. Press the button to conrm the selection. The
appliance begins hot water delivery and the message
“Please wait” is displayed;
15. After delivery, the appliance is automatically ready to make
the next drink.
The new lter is active and indicated by an asterisk displayed
under “Install lter” in the menu. You can now use the
appliance.
Replacing the lter
When “Replace lter” is displayed, after two months (see
date indicator) or when the appliance has not been used for 3
weeks, you should replace the lter:
1. Extract the tank and exhausted lter;
2. Take the new lter out of its packet and proceed as
illustrated in points 2, 3, 4, 5 and 6 in the previous
section.
3. Position a container with a minimum capacity of 500 ml
under the hot water spout.
4. Press the P button to enter the menu.
5. Turn the selection dial until “Replace lter” is displayed.
6. Press the button.
7. “Conrm?” is displayed.
8. Press the button to conrm the selection;
9. “Hot water Conrm?” is displayed;
10. Press the button to conrm the selection. The
appliance begins hot water delivery and the message
“Please wait” is displayed;
11. After delivery, the appliance is automatically ready to make
the next drink.
The new lter is now active and you can use the coee
machine.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 23.460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 23.460 in the language / languages: English as an attachment in your email.

The manual is 6.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 23.460

DeLonghi ECAM 23.460 User Manual - German - 24 pages

DeLonghi ECAM 23.460 User Manual - Dutch - 23 pages

DeLonghi ECAM 23.460 User Manual - French - 17 pages

DeLonghi ECAM 23.460 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info