562583
20
Zoom out
Zoom in
Previous page
1/25
Next page
19
10. The appliance is now ready for rinsing through with clean
water. Empty the container used to collect the descal-
er solution. Extract the water tank, empty, rinse under
running water, ll with fresh water up to the MAX level
and put back in the appliance: "RINSING, Conrm?" is
displayed;
11. Place the container used to collect the descaler solution
empty under the coee spouts and hot water spout (g.
37);
12. Press the button to start rinsing. Hot water ows out
of the spouts and the message "Rinsing Please wait" is
displayed;
13. When the water tank is empty, the messages "RINSING",
"FILL TANK" and "REPLACE FILTER" (if previously removed)
alternate on the display;
14. Remove the water tank, replace the lter (if previously re-
moved), ll the tank up to the MAX level with fresh water
and insert it in the appliance: the display will show "RINS-
ING Conrm?";
15. Place the container used to collect the rinsing water empty
under the hot water spout;
16. Press the button to restart rinsing: Hot water ows
out of the hot water spout only and the message "RINSING
Please wait" is displayed;
17. When it nishes, the message "Rinsing complete, Con-
rm?" appears on the display;
18. Press the hot water button. The message "FILL
TANK" is displayed;
19. Empty the drip tray, remove and top up the water tank
with fresh water to the MAX level and put back in the
machine.
Descaling is complete.
Please note!
If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle;
After descaling, it is normal for the grounds container
(A15) to contain water.
15. SETTING WATER HARDNESS
The DESCALE message is displayed after a period of time estab-
lished according to water hardness.
The machine is set by default for a hardness value of 4. The ma-
chine can also be programmed according to the hardness of the
mains water in the various regions so that the machine needs to
be descaled less often.
15.1 Measuring water hardness
1. Remove the "TOTAL HARDNESS TEST" indicator paper (C1)
from its pack (attached to the English instructions);
2. Immerse the paper completely in a glass of water for one
second;
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. Each square corresponds to
one level;
15.2 Setting water hardness
1. Press the P button (B4) to enter the menu;
2. Turn the selection dial (B2) to select "Water Hardness".
3. Conrm the selection by pressing the button (B9);
4. Turn the selection dial and set the level shown by the indi-
cator paper (C1) (see previous section);
5. Press the button to conrm the setting;
6. Press the button (B5) to exit the menu.
The machine is now reprogrammed with the new water hard-
ness setting.
16. WATER SOFTENER FILTER
Certain models are tted with a water softener lter (C4). If this
is not the case with your model, you are recommended to pur-
chase one from De’Longhi Customer Services.
To use the lter correctly, follow the instructions below.
16.1 Installing the lter
1. Remove the lter (C4) from the packaging;
2. Turn the date indicator disk (see g. 38) until the next two
months of use are displayed;
3938
soft water
hard water
very hard water
slightly hard water
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 23.460.S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 23.460.S in the language / languages: English as an attachment in your email.

The manual is 3.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 23.460.S

DeLonghi ECAM 23.460.S User Manual - German - 24 pages

DeLonghi ECAM 23.460.S User Manual - Dutch - 23 pages

DeLonghi ECAM 23.460.S User Manual - French - 17 pages

DeLonghi ECAM 23.460.S User Manual - Italian - 23 pages

DeLonghi ECAM 23.460.S User Manual - Spanish - 17 pages

DeLonghi ECAM 23.460.S Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info