562583
16
Zoom out
Zoom in
Previous page
1/25
Next page
15
6. Attach the container to the connection nozzle and push
as far as it will go (g. 20). The machine emits a beep (if
enabled);
7. Place a suciently large cup under the coee spouts (A14)
and frothed milk spout (D5). Adjust the length of the milk
spout. To move it nearer the cup, simply pull it downwards
(g. 21);
8. Follow the instructions below for each function.
11.2 Adjusting the amount of froth
Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coees.
Dial
position
Description Recommended for
No froth HOT MILK
Min. froth
CAPPUCCINO /
LATTE MACCHIATO /
FROTHED MILK
Max. froth
11.3 Making cappuccino or latte macchiato
1. After attaching the milk container (D), turn the froth ad-
justment dial (D1) on the milk container lid (D2) to the
required position (g. 22);
2. Press the CAPPUCCINO button (B10). "CAPPUCCINO" ap-
pears on the display (B1), together with a progress bar
which lls gradually as preparation proceeds;
3. After delivering the milk, the machine automatically
makes the coee.
Please note:
If during delivery you want to stop making milk or coee,
press the CAPPUCCINO button twice.
At the end of delivery, to increase the quantity of milk or
coee in the cup press and hold (within 3 seconds) the
CAPPUCCINO button.
Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
11.4 Making frothed milk (without coee)
Proceed as described in the previous section “11.3 Making cap-
puccino or latte macchiato”), pressing the CAPPUCCINO button
(B10) twice instead of once.
Please note:
If during delivery you want to stop preparation, press the CAP
PUCCINO button once.
11.5 Preparing milk (unfrothed and without
coee)
Proceed as described in the previous section (“11.4 Making
frothed milk (without coee)”), turning the froth adjustment
dial (D1) to the position.
11.6 Cleaning the milk container after use
Important! Danger of burns
When cleaning the internal tubes of the milk container (D), a
little hot water and steam leak out of the milk spout (D5). Avoid
contact with splashes of water.
"SET DIAL TO CLEAN" appears on the display (B1) each time you
use a milk function. To eliminate all milk residues, proceed as
follows:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout
(g. 21);
3. Turn the froth adjustment dial (D1) to "CLEAN" (g. 23). A
progress bar appears on the display and gradually lls as
the operation proceeds together with the message "Clean-
ing underway, Please wait". Cleaning stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A13) with a sponge (g. 24).
Please note!
To prepare a number of cappuccinos or milk-based coees,
clean the milk container after you have prepared the last
drink only.
The milk container can be kept in the refrigerator.
In some cases, before cleaning you must wait for the appli-
ance to heat up.
11.7 Programming the quantity of coee and
milk in the cup for cappuccino or milk
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coee spouts (A14) and milk spout
(D5) (g. 21);
2. Press and hold the CAPPUCCINO BUTTON B10 until the
message "PROGRAM MILK Program Quantity" appears on
the display (B1);
3. Release the button. The appliance starts delivering milk;
4. Once the required quantity of milk has been delivered into
the cup, press the CAPPUCCINO button again;
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 23.460.S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 23.460.S in the language / languages: English as an attachment in your email.

The manual is 3.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 23.460.S

DeLonghi ECAM 23.460.S User Manual - German - 24 pages

DeLonghi ECAM 23.460.S User Manual - Dutch - 23 pages

DeLonghi ECAM 23.460.S User Manual - French - 17 pages

DeLonghi ECAM 23.460.S User Manual - Italian - 23 pages

DeLonghi ECAM 23.460.S User Manual - Spanish - 17 pages

DeLonghi ECAM 23.460.S Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info