Manual DeLonghi ECAM 22.360.B - MAGNIFICA S (page 18 of 22) (English)

562588

Zoom out

Zoom in

1/22

Level 1

Level 2

Level 3

Level 4

The machine can also be programmed according to the hardness

of the mains water in the various regions so that the machine

needs to be descaled less often.

Measuring water hardness

 

its pack (attached to the English instructions).

2. Immerse the paper completely in a glass of water for one

second.

3. Remove the paper from the water and shake lightly. After

about a minute, 1, 2, 3, or 4 red squares form, depending

on the hardness of the water. Each square corresponds to

one level.

Setting water hardness

1. Press the MENU button to access the menu.

2. Press the or button until “Water hardness” is

displayed.

3. Conrm the selection by pressing the button.

4. Press the or button repeatedly to set the level as

measured by the indicator paper (see previous section).

5. Press the button to conrm the setting.

The machine is now reprogrammed with the new water hard-



WATER SOFTENER FILTER

Certain models are tted with a water softener lter. If this is not

the case with your model, you are recommended to purchase

one from De’Longhi Customer Services.

To use the lter correctly, follow the instructions below.

Installing the lter

1. Remove the lter from the packaging.

2. Turn the date indicator disk (see g. 28) until the next two

months of use are displayed.

Please note :

The lter lasts about two months if the appliance is used nor-

mally. If the coee machine is left unused with the lter instal-

led, it will last a maximum of three weeks.

3. To activate the lter, run tap water through the hole in the

lter as shown in the gure until water comes out of the

openings at the side for more than a minute (g. 30).

4. Extract the tank from the appliance and ll with water.

5. Insert the lter in the water tank and immerse it com-

pletely for about ten seconds, sloping it to enable the air

bubbles to escape (g. 31).

6. Insert the lter in the lter housing (g. 32A) and press as

far as it will go.

 

in the machine.

When you install the lter you must notify the appliance of its

presence.

8. Press the MENU button to enter the menu;

9. Press the or button repeatedly until “Install l-

ter” is displayed.

10. Press the button.

 

12. Press the       



13. Position a container with a minimum capacity of 100 ml

under the spout.

14. Press the button to conrm the selection. The ap-

pliance begins hot water delivery and the message “Please

wait” is displayed.

15. After delivery, the appliance returns automatically to the

“Ready for coee” position.

The new lter is active and indicated by an asterisk displayed

under “Install lter” in the menu. You can now use the appliance.

Replacing the lter

When “REPLACE FILTER” is displayed, after two months (see date

indicator) or when the appliance has not been used for 3 weeks,

you should replace the lter:

1. Extract the tank and exhausted lter;

2. Take the new lter out of its packet and proceed as illustra-

ted in points 3, 4, 5 and 6 in the previous section.

3. Position a container with a minimum capacity of 100 ml

under the spout.

4. Press the MENU button to enter the menu;

5. Press the or button repeatedly until “Replace l-

ter” is displayed.

6. Press the button;

 

8. Press the button to conrm the selection;

 

10. Press the button to conrm the selection. The ap-

pliance begins hot water delivery and the message “Please

wait” is displayed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 22.360.B - MAGNIFICA S in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 22.360.B - MAGNIFICA S

DeLonghi ECAM 22.360.B - MAGNIFICA S User Manual - Dutch - 15 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi ECAM 22.360.B - MAGNIFICA S Manual

Product: