770038
20
Zoom out
Zoom in
Previous page
1/100
Next page
20
"INSERT" (g. 10), then turn the handle to the right until it is
aligned in the "CLOSE" position;
5. Place a container under the lter holder and the steam
wand (A6);
6. Press the OK button (B5): delivery will start (g. 11);
7. When delivery has nished, turn the steam dial (A4) (g.
12) and release the jet for a few seconds so as to rinse the
steam circuit: to ensure best possible results, repeat the
operation 3 or 4 times. The purpose of this procedure is
to purge any water from the circuit before using steam to
prepare a beverage.
The appliance is ready for use.
Please note: We also recommend rinsing the internal circuits if the appliance is
not used for a long period.
The rst time you use the appliance, you need to make 4-5 cups
of coee before the appliance starts to give satisfactory results.
Pay particular attention to the quantity of pre-ground coee
in the lter ((C2) or (C3)) (see instructions in section “4.1 Step
1 - Grinding”).
Proceed as described in section “The perfect dose”.
4. PREPARATION OF COFFEE
4.1 Step 1 - Grinding
1. Put coee beans in the container (A2) (g. 13). It is best to
grind only a quantity of beans sucient for immediate use,
so that the coee will always be fresh.
2. Select the grinding level (g. 14). The factory setting is 5
(medium ground). If this is too ne or too coarse, adjust
the level according to personal taste and to the type of cof-
fee being used (the adjustment must be made only when
the coee mill is in operation).
Please note: A grinding level between 3 and 6 is recommended
for most coees. A grinding level of 1 or 2 is very ne and should
be used with special coees only (light roasted)
3. Place the ground coee lter (C2) or (C3) in the lter holder
(C1) (g. 15); If the 2-cup lter is in use, press the 2x button
(B3): this will also double the quantity of espresso coee
delivered from the spout.
4. Set the quantity by adjusting the dial (B2), starting from
the minimum position (g. 16).
Refer to the section on Adjusting the quantity of ground coee
in the lter” for further indications.
5. Attach the lter holder to the outlet of the coee mill
(A19), aligning it with "INSERT", then turning it to the right.
Grinding begins when the lter holder reaches the CLOSE
position, then stops automatically.
Adjusting the quantity of ground coee in the lter
XLIGHT
LIGHT
MEDIUM
MEDIUM
 DARK DARK
XDARK
Extra grinding
range
Dierent varieties of coee bean give dierent results when
ground: consequently, the initial adjustment of the dosage re-
quires special care.
This illustration shows how to regulate the dosage, based on the
roast colour: this should be taken as a general guide, given that
in practice, the nal adjustment can vary according to the com-
position of the beans.
1. Set the dosage starting from the minimum position.
2. Looking at the roast colour of your particular beans, turn
the dial slowly to nd the right adjustment.
4.2 Step 2 - Tamping
1. Following the grinding step, bring the tamping lever (A20)
down completely (keeping the lter in place under the
outlet) (g. 17). For a perfect result, repeat the step twice.
2. Keep the tamping lever fully down when removing the
lter holder (g 18) and then return the lever to its initial
position.
3. Having checked that the dosage is as required (see “The
“perfect dose””),
attach the lter holder to the brewer out-
let (A18) (g. 19).
Please note: Coee left on the edges of the lter after pressing
does not in any way compromise the quality of the brewing and
therefore the end result.
The “perfect dose”
A reference mark inside the coee lters identies the per-
fect quantity.
The “perfect
dose”
Laser marking Relief mark
- Laser marked lters: the perfect quantity corresponds
to the top line of the mark.
- Filters with relief mark: the perfect quantity corre-
sponds to the line in relief.
Make sure the coee is at the right level after tamping. It
might be necessary to adjust the level a few times using the
dial (B2) before the ideal dosage is achieved.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi EC9355 - La Specialista Presigio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi EC9355 - La Specialista Presigio in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 36.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info