Manual DeLonghi EC 860 (page 13 of 16) (English)

583285

Zoom out

Zoom in

1/16

2. Place a cup or other container under the milk spout tube.

3. Keepthe“CLEAN”button(g.25) pressed:lights

and

ash. When the lights stop ashing and the

appliancegoesbacktoreadyforuse,releasethe“CLEAN”

button: the steam cleans the circuits inside the milk

frother.

Program the amount of coee and milk in the cup for

cappuccino or milk

The machine has been set by default to deliver standard amounts

ofcoeeandmilk.Ifyouwouldliketoamendthesequantities,

proceed as follows:

1. Place a cup under the coee spouts and the milk spout

tube.

2. Press the button relative to the preparation with milk to

be programmed and keep it pressed. After a few seconds,

the machine starts delivering the milk.

3. Once the required quantity of milk has been delivered into

thecup,releasethebutton;milkdeliverystops.

4. Program the amount of coee into the cup as for the

amount of milk.

5. Programming is conrmed by the lights ashing for 3

seconds.

The machine is now re-programmed according to the new

amounts of milk and coee.

Preparing the hot water and steam

Scalding hazard!

Do not leave the machine unattended when delivering hot

water. The spout heats up during delivery, therefore, only the

black part must be held.

Delivering hot water

1. Checkthehotwaterspoutiscorrectlyattached(g.8).

2. Place a cup under the spout (as near as possible to avoid

sprays).

3. Press the button(B7):therelativelightashesand

the appliance starts hot water delivery.

4. The machine automatically stops delivery.

Please note!

• Tomanuallyinterruptthehotwaterdelivery,press

button again.

Programming the amount of water automatically

delivered

Ifyouwouldliketoamendtheamountofwatersetbydefault,

proceed as follows:

1. Place a cup under the water spout.

2. Keep the button pressed.

3. When the hot water in the cup reaches the required level,

release the button. Programming is conrmed by the

lights ashing for three seconds.

The machine is now re-programmed according to the new

amount.

Delivering steam

1. Checkthehotwaterspoutiscorrectlyattached(g.8).

2. Fill a container with the liquid to be heated/frothed and

immerse the water/steam spout into the liquid.

3. Press twice the button(B7):therelativelightashes

and the appliance starts steam delivery.

4. When the required temperature is obtained, interrupt

steamdeliverybypressingthebuttonagain.(Youshould

not discharge steam for more than 3 minutes at a time).

Important!

Always stop steam delivery before extracting the container

containing the liquid to avoid burns from splashes.

Cleaning the water spout after use

Always clean the spout after use to avoid the build-up of milk

residues and prevent the spout from clogging.

1. Place a container under the cappuccino maker and press

the buttontodeliveralittlewater(g.3).

Stop the ow of water by pressing the button

again.

2. Wait a few minutes for the cappuccino maker to cool

down, then extract the hot water spout.

3. Checktheholeisnotblocked.Ifnecessary,cleanwitha

pin.

4. Wash all parts of the cappuccino maker thoroughly with a

sponge and warm water.

5. Reinsertthewaterspout.

Cleaning

Attention!

• Do not use solvents, abrasive detergents or alcohol to

clean the machine.

• Only the milk container (D) can be washed in the dish

washer. No other part of the appliance can be washed in

the dishwasher.

•

Do not use metal objects to remove coee deposits or

fouling as they might scratch the metal or plastic surfaces.

Instructions for use

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi EC 860 in the language / languages: English as an attachment in your email.

The manual is 5,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi EC 860

DeLonghi EC 860 User Manual - German - 10 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi EC 860 Manual

Product: