711865
5
Zoom out
Zoom in
Previous page
1/9
Next page
10
4. Remove any excess coee from the rim of the lter holder
and attach the lter holder to the appliance. To attach
correctly, align the lter holder handle with the INSERT
symbol (g. 9), attach the lter holder and rotate the
handle towards the right until aligned with the CLOSE
symbol.
5. Place the cup or cups under the lter holder spouts (g.
10). You are recommended to warm the cups before
making coee by rinsing them with a little hot water.
6. Make sure the lights corresponding to the coee buttons
are on, then press the
or coee button. The
appliance proceeds to make the coee and delivery is
interrupted automatically.
How to make espresso coee using pods
Please note:
use pods conforming to the ESE standard, indicated on the pack
by the following symbol.
The ESE standard is a system accepted by
leading pod producers and enables espresso
coee to be prepared simply and cleanly.
1. Place the lter for coee pods (with the
symbol on
the bottom) in the lter holder.
2. Insert the pod, centring it as far as possible on the lter
(g. 11). Always follow the instructions on the pod pack to
position the pod on the lter correctly.
Proceed as described in points 4 to 6 in the previous section.
Please note:
While the appliance is making coee, delivery can be
interrupted at any moment by pressing the coee button
pressed previously.
At the end of delivery (within 3 seconds), to increase the
amount of coee in the cup, press and hold the coee
button pressed previously. Delivery is automatically
interrupted after a few seconds.
To remove the lter holder, turn the handle from right to
left.
Danger of burns!
To avoid splashes, never remove the lter holder while the
appliance is delivering coee. Always wait for a few seconds
after delivery.
Programming the quantities of coee in the cup
The appliance is set by default to automatically deliver standard
quantities.
To change these quantities, proceed as follows:
1.
Place one or two cups under the lter holder spouts.
2. Press and hold the button you want to programme (
or ). The appliance starts delivering coee and the
other coee button ashes to indicate that programming
is underway.
3. Once the required quantity of coee has been delivered
into the cup, release the button. Delivery stops and the
light ashes to indicate that the quantity has been saved
correctly.
4. When the two coee lights come on steadily, the appliance
is ready for use.
HOW TO MAKE CAPPUCCINO
1. Prepare the espresso coees as described in the previous
paragraphs, using suciently large cups.
2. Press the
button (g. 12). The light ashes;
3. In the meantime, ll a recipient with about 100 g of milk
for each cappuccino to be prepared.
The milk must be at refrigerator temperature (not hot!).
In choosing the size of the recipient, bear in mind that the
milk doubles or triples in volume (g. 13).
Please note:
You are recommended to use semi-skimmed milk at refrigerator
temperature.
4. Wait for the light corresponding to the
button to
come on steadily, indicating that the boiler has reached
the ideal temperature to produce steam.
5. Position an empty container under the cappuccino maker
and open the dial for a few seconds to eliminate any air left
in the circuit. Close the dial again.
6. Place the recipient containing the milk under the
cappuccino maker.
7. Dip the cappuccino maker in the milk for a few millimetres
(g. 14).
Turn the dial to the
position. Steam is delivered
from the cappuccino maker, giving the milk a creamy
frothy appearance. To obtain a creamier froth, immerse the
cappuccino maker in the milk and rotate the container with
slow upward movements.
8. When the milk has doubled in volume, immerse the
cappuccino maker deeply and continue heating the milk
(g. 15). When the required temperature (the ideal is 60°C)
and froth density is reached, interrupt steam delivery by
turning the steam dial clockwise.
9. Pour the frothed milk into the cups containing the espresso
coee prepared previously.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi EC 685 - Dedica at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi EC 685 - Dedica in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi EC 685 - Dedica

DeLonghi EC 685 - Dedica Quick start guide - English - 16 pages

DeLonghi EC 685 - Dedica User Manual - German - 9 pages

DeLonghi EC 685 - Dedica User Manual - Dutch - 9 pages

DeLonghi EC 685 - Dedica User Manual - French - 9 pages

DeLonghi EC 685 - Dedica User Manual - Italian - 11 pages

DeLonghi EC 685 - Dedica User Manual - Spanish - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info