15
ENGLISH
Installation
Electrical connections
Before plugging the appliance into the mains socket, check that:
• The mains power supply corresponds to the power supply indicated on the rating plate.
• The power socket and electrical circuit are adequate for the appliance.
• The power socket matches the plug. If this is not the case, have the plug replaced by a qualified
electrician;
• The mains socket is adequately earthed.
Installation
Position the appliance in the room to
be dehumidified.
Please follow the minimum distances
between the appliance and furniture or
walls, as stated in fig. 1.
Failure to do so would obstruct ventila-
tion, jeopardising correct operation of
the appliance.
When the appliance is functioning.
You should keep all doors and windows
closed while the appliance is in opera-
tion.
If doors and windows are opened, the
temperature and humidity in the room
may change and it could therefore
require longer to dehumidify the room.
With temperatures of less than 1 °C or
above 40 °C, dehumidification is auto-
matically deactivated and the
appliance switches to fan only mode.
If the humidity is lower than 20%, the safety circuit triggers automatically and the dehumidifier
shuts down to avoid damage.
If the humidity in the room drops, the dehumidification capacity is automatically reduced.
Do not drop or tilt the appliance.
If the appliance falls over, place it upright immediately.
Even when the room is dehumidified, condensation and mould may form externally or in poorly
ventilated points, for example behind furniture.
MIN. 60 cm
MIN. 20 cm
MIN. 50 cm
MIN. 20 cm
MIN. 20 cm
