687409

DeLonghi Dinamica Plus ECAM370.85 Manual

11
Zoom out
Zoom in
Previous page
1/20
Next page
16
34 35
A
B
A B
+
4. "DESCALER (LEVEL A)" "AND WATER (LEVEL B)" (g. 35);
Pour the descaler into the tank up to the level A marked
inside the tank (equal to one 100ml pack), then add water
(one litre) up to level B and put the water tank back. Press
;
5. "EMPTY DRIP TRAY" (g. 22):
6. Remove, empty and replace the drip tray (A15) and
grounds container (A11). Press ;
7. "POSITION 2l CONTAINER" "OK TO START":
Place an empty container with a minimum capacity of 2 litres
under the hot water spout (D6) and coee spouts (A9) (g. 9);
Important! Danger of scalding
Hot water containing acid ows from the hot water and coee
spouts. Take care to avoid contact with splashes of this solution.
8. Press " " to conrm that you have added
the descaling solution. "DESCALING UNDERWAY" "PLEASE
WAIT" is displayed: The descale programme starts and
the descaler liquid comes out of the hot water and coee
spouts. A series of rinses is performed automatically to re-
move all the scale residues inside the coee machine;
After about 25 minutes, descaling stops;
9. "RINSE AND FILL WATER TANK UP TO MAX LEVEL" (g. 4):
the appliance is now ready to rinse with fresh water. Empty
the container used to collect the descaler solution. Extract
the water tank, empty, rinse under running water, ll
with fresh water up to the MAX level and put back in the
appliance;
10. "POSITION 2l CONTAINER" "OK TO START RINSING": Place
the container used to collect the descaler solution empty
under the coee spouts and hot water spout (g. 9) and
press
;
11. Hot water is delivered rst from the coee spouts, then
from the hot water spout and "RINSING UNDERWAY" is
displayed;
12. When the water in the
tank has run out, empty
the container used to
collect the rinsing water;
13. (If the lter is installed)
"INSERT FILTER INTO
ITS HOUSING" (g. 36).
Press " " and
extract the water tank.
Replace the water sof-
tener lter if removed
previously;
14. "RINSE AND FILL WATER TANK UP TO MAX LEVEL" (g. 4): Fill
the tank up to the MAX level with fresh water;
15. "INSERT WATER TANK" (g. 5): Put the water tank back in
the appliance;
16. "POSITION 2l CONTAINER" "OK TO START RINSING": Place
the container used to collect the descaler solution empty
under the hot water spout (g. 9) and press
17. Hot water is delivered from the hot water/steam spout and
"RINSING UNDERWAY" "PLEASE WAIT" is displayed;
18. "EMPTY DRIP TRAY" (g. 22): At the end of the second
rinse, remove, empty and replace the drip tray (A15) and
grounds container (A11) and press ;
19. "DESCALE COMPLETE": press ;
20. "FILL TANK WITH FRESH WATER": empty the container
used to collect the rinse water, remove the water tank and
ll with fresh water up to the MAX level, then put back in
the appliance.
The descaling cycle is now complete.
Please note!
• If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle;
• After descaling, it is normal for the grounds container
(A11) to contain water.
• If the water tank has not been lled to the MAX level, at
the end of descaling, the appliance requests a third rinse to
guarantee that the descaler solution has been complete-
ly eliminated from the machine's internal circuits. Before
starting rinsing, remember to empty the drip tray;
• The appliance may request descaling cycles at very short
intervals. This is normal and due to the appliance’s ad-
vanced control system.
14. SETTING WATER HARDNESS
The "DESCALING NEEDED PRESS OK TO START ~45MIN
" message is displayed after a period of time established
according to water hardness.
36
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Dinamica Plus ECAM370.85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Dinamica Plus ECAM370.85 in the language / languages: English as an attachment in your email.

The manual is 7.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Dinamica Plus ECAM370.85

DeLonghi Dinamica Plus ECAM370.85 User Manual - German - pages

DeLonghi Dinamica Plus ECAM370.85 User Manual - Dutch - 21 pages

DeLonghi Dinamica Plus ECAM370.85 User Manual - French - 20 pages

DeLonghi Dinamica Plus ECAM370.85 User Manual - Italian - 20 pages

DeLonghi Dinamica Plus ECAM370.85 User Manual - Spanish - 20 pages

DeLonghi Dinamica Plus ECAM370.85 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info