Manual DeLonghi Dinamica Plus - ECAM380.95 (page 13 of 28) (English)

821516

Zoom out

Zoom in

1/28

1. Leave the milk carafe in the machine (there is no need to

empty the carafe);

2. Place a cup or other recipient under the frothed milk spout;

3. Turn the froth adjustment dial (E1) to "CLEAN" (g. 18).

"CLEANING UNDERWAY RECIPIENT UNDER SPOUT" appears

on the display together with a bar which gradually lls as

cleaning progresses. Steam mixed with hot water comes

out of the frothed milk spout (g. 19). Cleaning stops

automatically;

18 19

4. Turn the dial back to one of the froth selections;

5. Remove the milk carafe and always clean the hot water

connection nozzle (A8) with a sponge (g. 20).

20 21

Where various drinks are prepared in succession:

• Proceed with cleaning of the carafe after the nal

preparation.

After multiple preparations, the milk carafe is empty

or the milk that remains is not enough to make further

drinks

• Having carried out the cleaning step with the froth adjust-

ment dial (E1) set to the “CLEAN” position, disassemble

the milk carafe and clean all components, proceeding as

described in heading “12.10. Cleaning the milk carafe”

After multiple preparations, there is enough milk left in

the carafe to make further drinks

• Having carried out the cleaning step with the froth adjust-

ment dial (E1) set to the “CLEAN” position, remove the milk

carafe, return it straight away to the fridge and clean all

components, proceeding as described in heading “12.10.

Cleaning the milk carafe”

Following preparation of milk-based drinks — general

notes:

• If the milk carafe is left out of the refrigerator for more

than 30 minutes, disassemble and clean all components,

proceeding as described in section “12.10. Cleaning the

milk carafe”.

• the carafe cannot be kept in the refrigerator for more than

2 days.

• If the milk carafe is not cleaned, the symbol (B7) ap-

pears on the display as a reminder that cleaning is required.

• In certain cases, the machine will need to heat up before

cleaning can take place.

10. DELIVERING HOT WATER

1. Make sure the hot water spout (D6) is attached correctly to

the hot water connection nozzle (A8);

2. Place a cup under the spout;

3. Press “HOT WATER”; The corresponding image appears on

the display, together with a progress bar which lls gradu-

ally as preparation proceeds;

4. The machine delivers hot water, then delivery stops auto-

matically. To interrupt hot water delivery manually, press

Please note!

• If "Energy Saving" mode is active, there may be a delay of a

few seconds before the hot water is delivered.

• Preparation of hot water can be customised (see section

"11. Customising drinks"").

11. CUSTOMISING DRINKS

The intensity (when required) and the quantity of drinks can be

customised.

To access the function, press the button (C3). Scroll the

menu and select .

1. Select the required prole;

2. Select the drink to be customise: the requisite accessories

must be tted;

3. For coee drinks only, select the required intensity by

pressing “- “ o “+” then press ;

4. Preparation begins and the display shows the drink with

a vertical bar. The star alongside the bar represents the

current quantity;

5. When the amount reaches the minimum programmable

quantity, the message will be displayed;

6. Press when the required quantity in the cup

is reached;

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Dinamica Plus - ECAM380.95 in the language / languages: English as an attachment in your email.

The manual is 10.81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Dinamica Plus - ECAM380.95

DeLonghi Dinamica Plus - ECAM380.95 User Manual - German - 32 pages

DeLonghi Dinamica Plus - ECAM380.95 User Manual - Dutch - 124 pages

DeLonghi Dinamica Plus - ECAM380.95 User Manual - French, Italian - 52 pages

DeLonghi Dinamica Plus - ECAM380.95 User Manual - Portuguese, Spanish - 124 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi Dinamica Plus - ECAM380.95 Manual

Product: