Manual DeLonghi Dinamica ECAM 350.55 (page 10 of 21) (English)

687413

Zoom out

Zoom in

1/21

container after use”, “14.10 Cleaning the milk container”

and “14.11 Cleaning the hot water nozzle”.

11.1 Filling and attaching the milk container

1. Remove the lid (D2) (g. 12);

2. Fill the milk container (D3) with a sucient quantity of

milk, not exceeding the MAX level marked on the handle

(g. 13). Each mark on the side of the container corre-

sponds to 100ml of milk;

Please note:

• For a denser more even froth, you must use skimmed or

partially skimmed milk at refrigerator temperature (about

5°C).

• If "Energy Saving" mode is enabled, you may have to wait

a few seconds before the rst cappuccino is delivered.

3. Make sure the milk intake tube (D4) is correctly inserted in

the bottom of the milk container lid (g. 14);

4. Place the lid back on the milk container;

5. Remove the hot water spout (C6) from the connection noz-

zle (A8) (g. 15);

6. Attach the container to the connection nozzle and push

as far as it will go (g. 16). The machine emits a beep (if

enabled);

7. Place a suciently large cup under the coee spouts (A9)

and frothed milk spout (D5). Adjust the length of the milk

spout. To move it nearer the cup, simply pull it downwards

(g. 17);

8. Follow the instructions below for each function.

11.2 Adjusting the amount of froth

Turn the froth adjustment dial (D1) to adjust the amount of froth

on the milk delivered while making cappuccinos and milk-based

coees.

Dial

position

Description Recommended for…

No froth HOT MILK (not frothed) /

CAFFELATTE

Min. froth LATTE MACCHIATO /

FLAT WHITE

Max. froth CAPPUCCINO/ CAPPUCCI

NO+ / ESPRESSO MACCHIA

TO / HOT MILK (frothed)

11.3 Making cappuccino and milk-based coees

automatically

1. Fill the milk container (D) and attach it as described above;

2. Select the required beverage:

Directly selected beverages:

• : CAPPUCCINO (B10)

• : Latte Macchiato (B11)

Select by pressing (B12):

• Caelatte

• Flat white

• Hot milk

3. After a few seconds, preparation begins automatically, a

progress bar appears on the display and gradually lls as

preparation proceeds;

4. After delivering the milk, the machine automatically

makes the coee (if required by the recipe).

Please note:

• If you want to interrupt preparation during delivery, press

the arrow corresponding to "STOP" (B4).

• Do not leave the milk container out of the refrigerator for

long periods. The warmer the milk (5°C is ideal), the poorer

the quality of froth produced.

• The beverages can be customised (see sections “8.3 Pro-

gram beverages” and “8.4 Program My beverages”).

11.4 Cleaning the milk container after use

Important! Danger of burns

• When cleaning the internal tubes of the milk container (D),

a little hot water and steam leak out of the milk spout (D5).

Avoid contact with splashes of water.

"Set dial to CLEAN, ESC to cancel" appears on the display (B1)

each time you use a milk function. Clean as described to elim-

inate all milk residues (or press “ /ESC” (B5) to clean later):

1. Leave the milk container (D) in the machine (you do not

need to empty it);

2. Place a cup or other recipient under the frothed milk spout;

3. Turn the froth adjustment dial (D1) to “CLEAN” (g. 19).

“Cleaning underway” appears on the display, together

with a progress bar which gradually lls as the operation

proceeds. Cleaning stops automatically;

4. Turn the dial back to one of the froth selections;

5. Remove the milk container and always clean the steam

connection nozzle (A8) with a sponge (g. 20).

Please note!

• To prepare a number of cappuccinos or milk-based coees,

clean the milk container after you have prepared the last

beverage only. In this case, press /ESC (B5) to go back to

the main menu.

• The milk container can be kept in the refrigerator.

• In some cases, before cleaning you must wait for the appli-

ance to heat up.

hallo, ingeprgrammeerde koffie kan dat ook veranderd worden of teruggebracht naar andere waarde<
MVG Fred Submitted on 23-10-2020 at 10:49
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Dinamica ECAM 350.55 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Dinamica ECAM 350.55

DeLonghi Dinamica ECAM 350.55 User Manual - German - 22 pages

DeLonghi Dinamica ECAM 350.55 User Manual - Dutch - 21 pages

DeLonghi Dinamica ECAM 350.55 User Manual - French - 20 pages

DeLonghi Dinamica ECAM 350.55 User Manual - Italian - 27 pages

DeLonghi Dinamica ECAM 350.55 User Manual - Spanish - 21 pages

DeLonghi Dinamica ECAM 350.55 Additional guide - All languages - 6 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi Dinamica ECAM 350.55 Manual

Product: