Manual DeLonghi Dinamica ECAM 350.55 (page 7 of 21) (English)

687413

Zoom out

Zoom in

1/21

3. Press OK (B3) to conrm and select the required item with

the selection arrows. Then follow the instructions for each

setting.

• Set temperature:

To modify the temperature of the water used to make the coee,

proceed as follows:

4. Press OK (B3). The current value appears on the display

(B1) and the "New" value ashes;

5. Select the new value you want to set using the selection

arrows (B2 or B4);

6. When the required value (low, medium, high, maximum)

has been selected, press OK.

The display goes back to the previous screen.

• Water hardness:

For instructions on identifying and setting water hardness, see

section “16. Setting water hardness”.

• Auto-o (standby):

Auto-o can be set so that the appliance goes o after 15 or 30

minutes, or 1, 2 or 3 hours

4. Press OK. The current value appears on the display (B1) and

the "New" value ashes;

5. Select the new value you want to set using the selection

arrows (B2 or B4);

6. When the required value (low, medium, high, maximum)

has been selected, press OK.

The display goes back to the previous screen.

• Energy saving:

Use this function to enable or disable energy saving. When en-

abled, the function reduces energy consumption in compliance

with European regulations.

To disable or enable "Energy Saving", proceed as follows:

4. Press OK. The current state ("Enabled" or "Disabled") and

the operation to be performed ("Disable?" or "Enable?") is

displayed. Press OK to conrm;

5. Press OK to disable or enable the function.

The display goes back to the previous screen.

Please note!

• when the function is enabled, the symbol "ECO" appears

on the display.

• When in energy saving mode, a few seconds elapse before

the rst coee, cappuccino or milk-based coee is deliv-

ered as the appliance must heat up again.

• If the milk container (D) is inserted, "Energy Saving" can-

not be activated.

• Beep:

Use this function to enable or disable the beep. Proceed as

follows:

4. Press OK. The current state ("Enabled" or "Disabled") and

the operation to be performed ("Disable?" or "Enable?") is

displayed. Press OK to conrm;

5. Press OK to disable or enable the function.

The display goes back to the previous screen.

• Default beverages:

Use this function to reset the default values for all the beverag-

es, or the individual beverages programmed previously. Select

the beverage, then proceed as follows:

4. Select "All" to reset the aroma and quantity settings to the

default values, or select the required beverage, then press

OK;

5. "Reset?": to reset the default values, press OK.

6. "Reset complete": the appliance conrms the reset and

goes back to the previous screen.

To reset another beverage, repeat from point 4 or to exit, press

/ESC (B5).

• Default values:

Use this function to reset all the appliance and beverage settings

(apart from the language which remains as selected the rst

time the appliance was used). Select the item, then proceed

as follows:

4. "Reset?"; press OK;

5. "Reset complete": the appliance conrms the reset and

goes back to the previous screen.

To exit, press /ESC (B5).

8.6 Statistics

This displays statistics relating to the machine. To display the

statistics, proceed as follows:

1. Press (B6) to enter the "Settings" menu;

2. Press the selection arrows (B2 and B4) until "Statistics" is

displayed between the two lines;

3. Press OK (B3): statistics on the appliance are displayed, use

the selection arrows to scroll through the items;

4. Press /ESC (B5) to exit.

To go back to the main screen, press /ESC.

9. RINSING

Use this function to deliver hot water from the coee spouts

(A9) and hot water spout (C6), if inserted, to clean and heat the

appliance’s internal circuit.

Place a container with a minimum capacity of 100ml under the

coee and hot water spouts.

Important! Danger of burns.

Do not leave the appliance unattended while hot water is being

delivered.

hallo, ingeprgrammeerde koffie kan dat ook veranderd worden of teruggebracht naar andere waarde<
MVG Fred Submitted on 23-10-2020 at 10:49
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Dinamica ECAM 350.55 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Dinamica ECAM 350.55

DeLonghi Dinamica ECAM 350.55 User Manual - German - 22 pages

DeLonghi Dinamica ECAM 350.55 User Manual - Dutch - 21 pages

DeLonghi Dinamica ECAM 350.55 User Manual - French - 20 pages

DeLonghi Dinamica ECAM 350.55 User Manual - Italian - 27 pages

DeLonghi Dinamica ECAM 350.55 User Manual - Spanish - 21 pages

DeLonghi Dinamica ECAM 350.55 Additional guide - All languages - 6 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi Dinamica ECAM 350.55 Manual

Product: