687415
16
Zoom out
Zoom in
Previous page
1/24
Next page
15
the milk a creamy frothy appearance and making it more
voluminous;
9. For a creamier froth, rotate the container with slow move-
ments in an upward direction;
10. When the required temperature is obtained, interrupt
steam delivery by pressing the selection arrow correspond-
ing to "STOP".
Danger of burns!
Stop steam delivery before removing the container with the
frothed milk to avoid burns caused by splashes of boiling milk.
11. Add the milk froth to the coee prepared previously. The
cappuccino is ready. Sweeten to taste and, if desired, sprin-
kle the froth with a little cocoa powder.
Please note!
If “Energy saving is active, you may have to wait a few seconds
before steam is delivered.
10.1 Making hot milk (not frothed)
To make hot milk without froth, proceed as described in the
above section, but with the cappuccino maker selection ring
(A21) positioned upwards in the "HOT MILK" position.
10.2 Cleaning the cappuccino maker after use
Clean the cappuccino maker (A20) each time you use it to avoid
the build-up of milk residues or blockages.
Danger of burns!
When cleaning the cappuccino maker, a little hot water is deliv-
ered. Avoid contact with splashes of water.
1. Deliver a little water by pressing the icon (B6 - g.13).
To interrupt, press the selection arrow (B4) corresponding
to "STOP".
2.
Wait a few minutes for the cappuccino maker to cool down.
Turn the cappuccino maker downwards to remove it (g.
14).
3. Move the selection ring (A21) upwards
(g. 15)
.
4. Remove the connection nozzle downwards
(A22 - g. 16)
.
5. Make sure the two holes shown by the arrow in
g. 17
are
not blocked. If necessary, clean with a pin.
6.
Replace the connection nozzle, move the selection ring
downwards and put the cappuccino maker back on the
nozzle
(g. 18)
,
turning it clockwise and pushing it upwards
until it is attached.
11. PROGRAMMING AND SELECTING
In you can select beverages customised to your per-
sonal tastes. If the beverages have not yet been programmed,
the appliance will request the customisation procedure before
proceeding with delivery:
1. Press (B13);
2. Press the selection arrows (B2 and B4) until the required
beverage is displayed between the two dotted lines;
Unprogrammed beverages:
3. Press OK (B3) to select;
4. "Program aroma" appears on the display. Press the selec-
tion arrows (B2 and B4) or (B7) until the required
aroma is selected. Press OK. "Program coee" appears on
the display together with a bar which gradually lls as de-
livery progresses. When the required quantity is reached,
press OK.
5. The appliance then makes the coee. Press OK to interrupt
delivery when the required quantity of coee is reached.
6. "Save parameters?": to save the settings, press OK (other-
wise press ESC - B2 or B5).
8. "Parameters saved" (or "Parameters not saved"). The ap-
pliance is ready for use again.
Programmed beverages:
3. Press OK (B3) to select;
4. Preparation begins according to the previously pro-
grammed settings.
Please note:
Two cups of a beverage can only be selected when the corre-
sponding single beverages have been programmed.
12. DELIVERING HOT WATER
Important! Danger of burns.
Never leave the machine unattended while delivering hot water.
The cappuccino maker (A20) becomes hot while water is being
delivered and must be held by the black ring (A21) only.
1. Place a container under the cappuccino maker (A20) (as
close as possible to avoid splashes).
2. Press (B6 - g. 13). "HOT WATER” appears on the dis-
play (B1), together with a progress bar which lls gradual-
ly as preparation proceeds.
4. The machine delivers about 250 ml of hot water, then de-
livery stops automatically. To interrupt hot water delivery
manually, press the selection arrow (B4) corresponding to
"STOP" again.
Please note!
If “Energy Saving is active, you may have to wait a few seconds
before hot water and steam are delivered.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Dinamica ECAM 350.35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Dinamica ECAM 350.35 in the language / languages: English as an attachment in your email.

The manual is 7,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Dinamica ECAM 350.35

DeLonghi Dinamica ECAM 350.35 User Manual - German - 22 pages

DeLonghi Dinamica ECAM 350.35 User Manual - Dutch - 19 pages

DeLonghi Dinamica ECAM 350.35 User Manual - French - 19 pages

DeLonghi Dinamica ECAM 350.35 User Manual - Italian - 25 pages

DeLonghi Dinamica ECAM 350.35 User Manual - Spanish - 18 pages

DeLonghi Dinamica ECAM 350.35 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info