687414
12
Zoom out
Zoom in
Previous page
1/24
Next page
11
2. Press and hold the icon (B9) until the lights on the
touch screen (B) come on;
3. Press the icon (B10);
4. Press the icon again to select the required
temperature:
low
medium
high
maximum
5. Press the OK icon (B15) to conrm (or ESC
(B14) to exit without making the change).
The lights go o.
The appliance returns to "standby" and the temperature is now
programmed.
10. AUTOOFF
The time can be changed so that the appliance switches o after
being idle for 15 or 30 minutes, or after 1, 2 or 3 hours.
To change the Auto-o setting, proceed as follows:
1. With the appliance o (standby), but the main switch
pressed (g. 1);
2. Press and hold the icon (B9) until the icons on the
touch screen (B) come on;
3. Press the icon (B11);
4. Select the required time interval by pressing the icon
again:
15 min.
30 min.
1 hour
2 hours
3 hours
5. Press the OK icon (B15) to conrm (or ESC
(B14) to exit without making the change). The lights go o.
The auto-o time is now programmed.
11. 11. ENERGY SAVING
Use this function to enable or disable energy saving. This mode
is active by default, reducing energy consumption while the ma-
chine is on in compliance with current European regulations. To
change the setting, proceed as follows:
1. With the appliance o (standby), but the main switch
pressed (g. 1);
2. Press and hold the icon (B9) until the icons on the
touch screen (B) come on.
3. Press the icon (B13);
4. Press the icon again to enable/disable the function:
function enabled
function disabled
5. Press the OK icon (B15) to conrm (or ESC
(B14) to exit without making the change).
6. Press ESC to exit the menu. The lights go o.
The energy saving setting is now programmed.
Please note!
When in energy saving mode, a few seconds may elapse
before the rst coee is delivered as the appliance must
heat up again.
12. 12. BEEP
This function enables or disables the beep. Proceed as follows:
1. With the appliance o (standby), but the main switch
pressed (g. 1);
2. Press and hold the icon (B9) until the lights on the
touch screen (B) come on.
3. Press the icon to enable/disable the function:
function enabled
function disabled
4. Press the OK icon (B15) to conrm (or ESC
(B14) to exit without making the change). The lights go o.
The beep is now programmed.
13. DEFAULT VALUES RESET
This function resets all settings (temperature, auto-o, water hard-
ness, energy saving and all quantity settings are reset to the default
values).
1. With the appliance o (standby), but the main switch
pressed (g. 1);
2. Press and hold the icon (B9) until the lights on the
touch screen (B) come on.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Dinamica ECAM 350.15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Dinamica ECAM 350.15 in the language / languages: English as an attachment in your email.

The manual is 12,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Dinamica ECAM 350.15

DeLonghi Dinamica ECAM 350.15 User Manual - German - 22 pages

DeLonghi Dinamica ECAM 350.15 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info