FOOD
TEMP.
SETTING
GRILL
POSITION
TIME REMARKS & TIPS
Chop (1) max 1 6’-8’
Chops should be of even thickness.
Beefburger (2) max 1 3’-5’
Wait 2-3’ before opening the plate, otherwise
the burgers will break up.
Beef steak (1) med 1 2’-3’
Meat cooked rare in time indicated
Pork steak (1) max 1 2’-3’
Meat cooked rare in time indicated
Spare ribs (3) max 1 15’-18’
Turn ribs after 10’
Liver (2) med 1 2’-3’
Clean liver thoroughly
Kebabs (3) max 1 8’-10’
Turn after 4-5’
Chicken (1 kg) med 1 75’-80’
Cut open in half, do not turn
Sausage (3) max 1 3’-5
Cut in half
Fresh sausage (2) max 1 4’-6’
Cut in half
Salmon trout fillet (1) med 2 16’-20’
Oil the plate and turn halfway through cooking
Salmon steak (1) med 2 16’-20’
Oil the plate and turn halfway through cooking
Sole (1) med 2 18’-22’
Oil the plate and turn halfway through cooking
Aubergines
(6 slices)
med 1 6’-8’
Slice evenly
Courgettes
(7 slices)
med 1 6’-8’
Slice evenly
1 pepper/capsi-
cum (quarters)
med 1 6’-8’
Close the grill plates and press down
Onions (sliced) med 1 6’-8’
Slice evenly
Polenta (slices) med 1 20’-25’
Cut into 1.5 cm. thick slices. Leave to cook with
plates closed for 15’
Filled bread rolls med 1 3’-9’
Use soft rolls
Toasted sandwich med 1 2’-3’
Place only half a cheese slice in each sandwich
as it tends to spill as it melts.
Pizza med 2 40’-45’
Remove the bottom grill plate and spread out
the pizza dough on top. Replace the plate and
add topping.
A) If your appliance comes fitted with a plug, it will incorporate
a 13 Amp fuse. If it does not fit your socket, the plug should
be cut off from the mains lead, and an appropriate plug fit-
ted, as below.
WARNING: Very carefully dispose of the cut off plug after
removing the fuse: do not insert in a 13 Amp socket elsewhe-
re in the house as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the circuit
must be protected by a 15 Amp fuse.
If the plug is a moulded-on type, the fuse cover must be re-
fitted when changing the fuse using a 13 Amp Asta appro-
ved fuse to BS 1362. In the event of losing the fuse cover,
the plug must NOT be used until a replacement fuse cover
can be obtained from your nearest electrical dealer. The
colour of the correct replacement fuse cover is that as
marked on the base of the plug.
B) If your appliance is not fitted with a plug, please follow the
instructions provided below:
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance with
the following code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead may not corre-
spond with the coloured markings identifying the terminals in
your plug, proceed as follows:
The green and yellow wire must be connected to the terminal in
the plug marked with the letter E or the earth symbol or
coloured green or green and yellow.
The blue wire must be connected to the terminal marked with
the letter N or coloured black.
The brown wire must be connected to the terminal marked with
the letter L or coloured red.
