24
INFORMATION ON THE DISPLAY
The display indicates any problems with the appliance.The appliance must be installed indoors in a room
without draughts and away from sources of heat and direct sunlight.
DISPLAY PROBLEM SOLUZIONE
“E:01” flashing Baking chamber too hot
to start another cycle
NB: after baking a loaf, you should let the appliance cool down to room temperature as at higher tempera-
tures the bread rises less due to the sensitivity of the active dry yeast.
You hear a beep:
When the appliance is turned on A long beep
When a menu setting is selected A short beep
At the start of a baking cycle One long beep
At the end of a baking process Short and long beeps
“EEE”or similar flashing
Electronic control malfunction
Reset the appliance as follows:
• Unplug from the mains socket.
• Hold the MENU button down.
• Plug in again and release the
MENU button. The appliance
performs a control cycle.
At the end, the original setting is
displayed.
If this is not the case, contact
Customer Services.
Open the lid and remove the pan to
cool the chamber. When the message
has disappeared from the control
panel, put the pan back in the baking
chamber and press again.