535579
2
Zoom out
Zoom in
Previous page
1/4
Next page
8
INTRODUCTION
Thank you for choosing a De’Longhi product. Please take a
few minutes to read these instructions. This will avoid all
risks and damage to the appliance.
Symbols used in these instructions
Important warnings are identied by these symbols.
It is vital to respect these warnings. Failure to observe the in-
structions could result in electric shock, serious injury, burns,
re or damage to the appliance.
Danger!
Failure to observe the warning may result in life threatening
injury by electric shock.
Important!
Failure to observe the warning could result in injury or dama-
ge to the appliance.
Please note:
This symbol identies important advice or information for
the user.
Troubleshooting and repairs
If the appliance requires repair, always contact the manufac-
turer’s Customer Services.
Always insist on original spare parts.
Repairs carried out by unauthorised personnel may be dan-
gerous and invalidate the guarantee.
Designated use
This is a household appliance only. Use only as described in
these instructions.
As with all electrical equipment, whilst the instructions aim
to cover as many eventualities as possible, caution and com-
mon sense should be used when operating and installing the
appliance.
IMPORTANT SAFEGUARDS
Fundamental safety warnings
Danger! This is an electrical appliance, it is therefore
important to respect the following safety warnings:
•
Never touch the appliance with wet or damp hands.
•
Never use the appliance with bare or wet feet.
•
Never touch the plug with damp hands.
•
Never immerse the appliance in water.
•
Make sure the socket used is freely accessible at all times,
enabling the appliance to be unplugged when necessa-
ry.
•
Unplug directly from the plug only. Never pull the power
cable as you could damage it.
•
To disconnect the appliance completely you must unplug
it from the mains socket.
•
If the appliance is faulty, do not attempt to repair.
Turn it o, unplug from the mains socket and contact Cu-
stomer Services.
•
If the power socket does not match the plug on the ap-
pliance, have the socket replaced with a suitable type by
a qualied electrician.
•
Never move the appliance by pulling on the power cable.
•
The appliance must not be modied in any way, as any
modications may be extremely dangerous.
•
If the power cable is damaged, it must be replaced by the
manufacturer or the manufacturer’s Customer Services in
order to avoid all risk.
•
Do not use an extension cable.
•
The appliance must be installed in accordance with the
rules on household appliances in force in the country con-
cerned.
Important! Keep all packaging (plastic bags, polyst-
yrene foam) away from children.
Important! Do not obstruct the air intake and outlet
grills.
Important safeguards en
9
TECHNICAL DATA
Power supply see rating plate
Absorbed power
Suitable for rooms of up to 80 m2 Mod. AC230
40 m2 Mod. AC150
number of fans 1
fan speed 3
ionizer button YES
Technical characteristics
In compliance with European directive 2002/96/EC,
the appliance must not be disposed of with house-
hold waste, but taken to an authorised waste separa-
tion and recycling centre.
DISPOSAL
IONIZER
NANO SILVER FILTER
PHOTOCATALYTIC FILTER
WITH UVC LAMP
PREFILTER
HEPA FILTER/ACTIVE
CARBON FILTER
IONIZER
en
Important! The appliance is not intended for use by
persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction con-
cerning use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they do
not play with the appliance.
TECHNICAL CHARACTERISTICS
• De’Longhipuriersincorporatethelatesttechnological
features for home air ltration;
• Theairistakeninthroughthefrontpanel;
• Thecontaminatedairpassesthroughawashableprel-
ter which removes large impurities such as coarse dust,
hair, etc. The partially ltered air is then passed through
a long-lasting HEPA lter with a large ltering surface,
easily recognisable by the special pleated paper. This
HEPA (High Eciency Particulate Air) lter removes im-
purities down to a size of 0.3 microns, ltering all types
of particle including tobacco, house dust and pollen;
• The air is then passed through a black active carbon
lter which removes a variety of pollutants and un-
pleasant odours such as smoke, ne dust particles and
formaldehyde. Some models have an active nano-silver
lter against most pathogens (Staphylococcus aureus
and Escherichia coli) yeasts and moulds. Moreover, the
appliance is equipped with a lter with photocatalytic
titanium dioxide with a UVC lamp, which can eliminate
a variety of bacteria and toxic gases.
• Thepuriedairisreturnedtotheroomthroughthetop
grille. The upward ow of air improves air circulation
in the environment, without generating irritating cur-
rents.
• Whenactive,theindependentlycontrolledionizerrele-
ases a cloud of benecial negative ions into the room
together with the outow of ltered air, allowing the
removal of dust particles, pollen, cigarette smoke and
car exhaust fumes.
• Oncontactwiththenegativeions,theparticlesofdust
suspended in the air are negatively charged and can
combine with the positively charged particles to form
larger particles which will then be ltered by the pu-
rier. The negative particles are attracted by positively
charged surfaces, such as the oor or wall.
• Negativeionsimprovetheionbalanceintheatmosphe-
re, as positive charges generally predominate. The ioni-
zer therefore helps reduce the static electricity created
by the presence of rugs, carpet, televisions and compu-
ter screens.
10
Description/Use en
DESCRIPTION
A) Front panel
B) Washableprelter
C) HEPA lter/active carbon lter
D) Nano-silver lter (certain models only)
E) Photocatalytic lter with UVC lamp
F) Air quality sensor
G) AQS (Air Quality System) Air quality LED indicator
H) Handle
I) Filtered air outlet grille
L) Power cable with plug
M) Cable compartment
N) Control panel
O) ON/OFF
P) Fan speed
Q) AUTOspeed
R) Ionizer
S)
AQS (Air Quality System) air quality LED indicator on/o
T) Auto-o
U) Reset button
V) Fan speed LED display
W) LED timer (1-2-4-8 h)
X) HEPA lter exhausted LED
Y) Safety microswitch
USE
Read these instructions before using the appliance.
•
Unpack the air purier and place on a stable at surface
so that the air intake in the front panel and air outlet
(top grille) are not blocked. A good position in the room
might be at least a metre from the wall.
•
Remove the front panel (g. 3). Inside the purier you
will nd the prelter (B) and HEPA lter/active carbon
lter (C) and the nano-silver lter (D) (certain models
only) packed, depending on the model, in a plastic bag.
And the photocatalytic lter (E) xed to the air intake
grill.
• Removethelter(s)(dependingonthemodel)fromthe
bag, as shown in g. 2, then place them in the following
order: nano lter, with the silver side adhering to the
appliance, HEPA lter with the black active carbon side
resting directly on and adhering to the nano-silver, then
the prelter, slotting it in place as shown in g. 4.
• Replacethefrontpanel;
• Aftermakingsurethevoltageinyourhomecorresponds
to the voltage indicated on the appliance, plug the ap-
pliance into the mains socket.
• Removetheprotectivelmfromthecontrolpanel.
• TurntheapplianceonbytouchingtheON/OFFicon(O).
The corresponding icon lights up and the appliance co-
mesonautomaticallyatminimumspeed.TheAUTOicon
(Q) ashes and the air quality LED indicators (G) light up
orange for 3 minutes. This time is necessary for the ap-
pliancetodetectairquality,thentheAUTOiconbecomes
steady and the air quality LED indicators (G) change co-
lour depending on the air quality detected and also the
fan speed changes accordingly:
BAD AIR QUALITY:
orange + max. fan speed
SATISFACTORY AIR QUALITY:
green + med. fan speed
GOOD AIR QUALITY:
blue + min. fan speed
Please note: the change in colour of the air quality in-
dicator (G) is always sequential:
ORANGE <-----> GREEN
<-----> BLUE
Please note: to vary the set fan speed, touch the icon
(P) corresponding to the required fan speed (Min/Med/
Max).
• TheLEDcorrespondingtotheselectedspeedlightsup.
Please note: When the appliance starts after having
been turned o, using a light pressure on the ON/OFF,
it starts with the last function set
with the exception of
the
auto-o function
).
AUTO” operation (Q)
TaptheAUTO”icon,theapplianceindependentlydecidesthe
fan speed according to the air quality detected (min, med,
max).
Ionizer (R)
Per il rilascio di ioni negativi nell’ambiente attraverso l’aria puri-
cata, toccare l’icona ionizzatore (R); il led relativo si accende.
Auto-o (T)
This function can be used to turn the appliance o automati-
cally after a given period of time.
Withtheapplianceon,touchtheauto-oicon(T) to select
how many hours should elapse before the appliance goes
o (1-2-4-8 hours). The corresponding LED comes on (e.g. if
auto-o after 4 hours is selected, rst the 4h icon comes on,
then after one hour, the 4h icon goes o and the 1h and 2h
Care and Maintenance en
11
icons come on to indicate that the appliance will go o after
3 hours, and so on).
AQS (S)
Tap the AQS icon (Air Quality System) to enable or disable
the air quality LED indicators (G). This function is particularly
useful if you want to completely eliminate the light source,
during night operation for example.
Note: the AQS icon enables or disables the LED indi-
cators only while the air quality detection system is
always active.
HEPA lter exhausted LED (X)
WhenthelterLED(X) ashes, the HEPA lter/active carbon
lter must be replaced. Proceed as follows:
After unplugging the appliance from the mains socket, remo-
ve the front panel (A) and the prelter (B), then remove the
HEPA lter/active carbon lter (C) and replace with a new one
obtainable from De’Longhi’s authorised Customer Services.
Replace the lters in the correct sequence as described above,
then put the front panel back.
At this point, turn the appliance back on and reset as follows:
• insertaneobjectintotheholeintheresetbutton(U)
and press until the ashing LED comes on steadily. Rele-
ase the button. After about 5 seconds, the lter LED (X)
goes o.
Please note: Before performing cleaning and mainte-
nance, always unplug the appliance from the mains
socket.
Please note: Before performing cleaning and mainte-
nance, always unplug the appliance from the mains
socket.
Please note: The appliance has a safety microswitch
(Y) which turns the appliance o whenever the front
panel (A) is removed.
Cable compartment (M)
The appliance has a practical cable compartment (M), useful
for storing the cable when the appliance is not in use.
CLEANING THE APPLIANCE
Clean the outside of the appliance with a soft slightly damp
cloth to remove dust, dirt or ngerprints. The front panel and
prelter can be removed and washed separately in hot soapy
water(theyareNOTdishwashersafe).Drythecomponents
thoroughly before putting them back in the appliance. The
top grille can be cleaned with a soft brush.
Do not clean the appliance by immersing in water.
MAINTENANCE AND FILTER
REPLACEMENT
• Rememberthattheeciencyofyourairpurierdepen-
ds on the condition of the lters. They should therefore
be checked regularly by removing the front panel.
Prelter (B)
• Checktheprelterregularly.
If large quantities of dust and other impurities have ac-
cumulated, remove and hand wash in hot soapy water.
Dry thoroughly before replacing in the appliance.
• Frequentcleaningoftheprelterhelpsextendthelifeof
the HEPA lter/active carbon lter.
• Whentheltergoesfromwhitetodarkgreyorbrown,
it must be replaced.
HEPA lter/active carbon lter (C)
• ThelifeofaHEPAlter/activecarbonlterdependson
the operating conditions of the appliance.
In general, considering about 4 hours operation a day at
medium speed with normal quantities of dust/smoke in
the air, it should last about 6 months. However, when the
HEPA lter exhausted LED (X) ashes, it must be replaced.
(See the HEPA lter exhausted LED indicator paragraph).
To replace the HEPA lter/active carbon lter, rst remo-
ve the prelter (B), then remove the HEPA lter/active
carbon lter (C) and replace with a new one.
• Donot washtheHEPAlter/activecarbon lter.When
exhausted, it cannot be regenerated.
• ReplacementDe’Longhilterscanbeobtainedfromthe
manufacturer’s Customer Services and household ap-
pliance shops.
Nano-silver lter (D) (certain models only)
• Thenano-silverlter(D)hasalifelongdurationbecause
it is protected by the HEPA lter. However, regular vacu-
uming is recommended.
Photocatalytic lter with UVC lamp (E)
• Itisapermanentlterthatrequiresnomaintenance. IT
MUST NEVER BE REMOVED as it acts as protection for
the UVC lamp.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi AC 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi AC 150 in the language / languages: English as an attachment in your email.

The manual is 0.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi AC 150

DeLonghi AC 150 User Manual - Dutch - 4 pages

DeLonghi AC 150 User Manual - French - 4 pages

DeLonghi AC 150 User Manual - Italian - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info