Replacing the Display Assembly
1. Follow the instructions in Before You Begin.
2. Place the palm-rest assembly on the display assembly and route the display cable, camera cable, and Mini-Card antenna cables through the routing
guides.
3. Replace the six screws that secure the display assembly to the palm-rest assembly.
4. Follow the instructions from step 2 to step 12 in Replacing the System Board.
5. Replace the battery (see Replacing the Battery).
6. Replace the base cover (see Replacing the Base Cover).
Display Bezel
Removing the Display Bezel
1. Follow the instructions in Before You Begin.
2. Remove the display assembly (see Removing the Display Assembly).
3. Using your fingertips gently peel off the display bezel surround off the display bezel.
4. Remove the four screws that secure the display bezel to the display back cover.
5. Lift the display bezel off the display assembly.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.