Back to Contents Page
Coin-Cell Battery
Dell™XPS™L511zServiceManual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
Removing the Coin-Cell Battery
1. Follow the instructions in Before You Begin.
2. Remove the base cover (see Removing the Base Cover).
3. Remove the battery (see Removing the Battery).
4. Disconnect the coin-cell battery cable from the system-board connector.
5. Make note of the coin-cell battery cable routing and remove the cable from the routing guides.
6. Slide and lift the coin-cell battery out of the computer.
Replacing the Coin-Cell Battery
1. Follow the instructions in Before You Begin.
2. Slide and place the coin-cell battery on the palm-rest assembly and route the coin-cell battery cable as noted earlier.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).