681822
381
Zoom out
Zoom in
Previous page
1/399
Next page
Troubleshooting |
381
Damage on the Leading Edge of Printout
Jam/Alignment Problems
NOTE:
Some of the following procedures that use the Tool Box on Dell Printer Hub and Dell Printer
Management Tool can be performed using the operator panel or Dell Printer Configuration Web
Tool. See "Tool Box," "Understanding the System Menus," and "Dell™ Printer Configuration Web
Tool."
Problem Action
The printout is wrinkled.
The printout is stained.
1 Verify that the correct print media is being used. See "Supported Print
Media." If not, use the print media recommended for the printer.
If the problem persists on envelopes, proceed to step 2.
If the problem persists on print media other than envelopes, proceed
to step 4.
2 Make sure that the wrinkle of the four edges of the envelope is within
30 mm.
If the problem persists on envelopes, proceed to step 3.
3 Load the envelopes in the Multipurpose Feeder (MPF) properly. See
"Loading Envelopes in the MPF" and "Loading Envelopes in the Tray1."
If the problem persists on envelopes, proceed to step 4.
4 Adjust the paper guides properly.
If the problem persists, proceed to step 5.
5 Replace the print media with the freshly unpackaged, undamaged
one.
If the problem persists, contact Dell.
Problem Action
The printout is damaged on its
leading edge.
1 Adjust the paper guides properly.
If the problem persists, proceed to step 2.
2 When using the Multipurpose Feeder (MPF), reverse the paper and
then try again.
If the problem persists, proceed to step 3a.
When using any of the trays, change the paper and then try again.
If the problem persists, contact Dell.
3a Change the paper with another one and then try again.
If the problem persists, proceed to step 3b.
3b Use any of the trays in place of the MPF.
If the problem persists, contact Dell.
381


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dell S2825cdn at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dell S2825cdn in the language / languages: English as an attachment in your email.

The manual is 8,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dell S2825cdn

Dell S2825cdn Installation Guide - English - 40 pages

Dell S2825cdn Installation Guide - German - 40 pages

Dell S2825cdn User Manual - German - 433 pages

Dell S2825cdn Installation Guide - Dutch - 40 pages

Dell S2825cdn User Manual - Dutch - 421 pages

Dell S2825cdn Installation Guide - Danish - 40 pages

Dell S2825cdn Installation Guide - French, Italian - 40 pages

Dell S2825cdn Installation Guide - Swedish - 40 pages

Dell S2825cdn Installation Guide - Spanish - 40 pages

Dell S2825cdn Installation Guide - Norwegian - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info