555804
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
Machine de soudure
en plastique de tube
Fig. 1-2
1 Pied support
2 Vis de règlage de la température
3 Poignée
4 Elément chauffant
5 Outils chauffants (manchons et douilles)
6 Voyant vert du contrôle réseau
7 Voyant rouge du contrôle température
Fig. 3
(1) Préparation
(2) Elément chauffant
(3) Raccord
(4) Douille mâle
(5) Douille femelle
(6) Tube
(7) Chauffage
(8) Assemblage terminé
1. CONSIGNES GÉNÉRALES DE SÉCURITÉ
AVERTISSEMENT
Toutes les directives doivent être lues. Le non-respect
des instructions présentées ci-après peut entraîner un
risque de décharge électrique, de brûlures et/ou d’autres
blessures graves. Le terme utilisé ci-après «appareil
électrique» se réfère aux outils électriques sur secteur
(avec câble de réseau), aux outils électriques sur ac-
cu (sans câble de réseau), aux machines et aux outils
électriques. N’utiliser l’appareil que pour accomplir les
tâches pour lesquelles il a été spécialement conçu et
conformément aux prescriptions relatives à la sécurité
du travail et à la prévention des accidents.
CONSERVER TOUTES LES CONSIGNES DE SÉCU-
RITÉ ET LES INSTRUCTIONS POUR USAGE ULTÉ-
RIEUR.
A) Poste de travail
a) Maintenir le poste de travail propre et rangé. Le
désordre et un poste de travail non éclairé peuvent
être source d’accident.
b) Ne pas travailler avec l’appareil électrique dans un
milieu où il existe un risque d’explosion, notamment
en présence de liquides, de gaz ou de poussières
in ammables. Les appareils électriques produisent
des étincelles qui peuvent mettre le feu à la pous-
sière ou aux vapeurs.
c) Tenir les enfants et des tierces personnes à l’écart
pendant l’utilisation de l’appareil électrique. Il y a un
risque de perte de contrôle de la machine en cas de
distraction.
Français
3.3.3. Setting
Connected sections must be xed (be kept together)
within a short time.
4. MAINTENANCE
WARNING
Before any repair work, pull the mains plug! This work
may only be performed by quali ed personnel.
4.1. Maintenance
Units are entirely maintenance-free.
4.2. lnspection/repairs
The anti-adhesive coating on the heating element must
be cleaned with nonadherent paper or a non-fraying
cloth and spirit or industrial alcohol before each welding
process. Any remnants of plastic adhering to the heating
element must be cleaned off in the same way. In this
process, take care to ensure that the anti-adhesive coat-
ing on the heating element is not damaged by tools.
5. ACTION IN CASE OF TROUBLE
5.1. Trouble: Sleeve welding unit does not heat.
Cause: Sleeve welding unit is not
plugged in.
Mains lead is defective.
Mains socket is defective.
Unit is defective.
5.2. Trouble: Plastic remnants stick onto the
heating tools.
Cause: Heating tools are dirty (see 4.2.).
Anti-adhesive coating is dam-
aged.
6. DISPOSAL
The heating element muff welding equipment may not
be thrown into the domestic waste after use. It must be
disposed of according to the legal regulations.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Defort DWP-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Defort DWP-1000 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info