555823
5
Zoom out
Zoom in
Previous page
1/40
Next page
5
GB
Submersible pump
for clean water
SAFETY AND OPERATING INSTRUCTIONS
For your own safety and for the safety of others, please
read these instructions carefully before using this appli-
ance. Keep in a safe place for future reference.
Warning! Always read the instruction for electrical
products care fully before use.
It will help you understand your product more easily
and avoid unnecessary risks.
Keep this instruction manual in a safe place for future
use.
TECHNICAL SPECIFICATIONS 1
FEATURES 2
1. Main motor housing
2. Universal connector
3. Power cable
SAFETY INSTRUCTIONS
This pump is not to be used to pump drinking water.
This pump is not to be used to pump combustible,
gaseous or explosive uids.
Dispose of plastic bags safely - they are a suffocation
hazard for young children.
Please read these instructions carefully and tho-
roughly before using this appliance and keep them for
future reference. It is very important that you under-
stand how to use this appliance safely so please take
the time to familiarize yourself with the requirements
as outlined in these instructions.
If you are in any doubt what so ever about using this
appliance, we strongly recommend that you employ
the services of a suitably quali ed person.
Electrical connection must be protected by a residual
current device (RCD) at the power socket with a
nominal trip current of 30mA (max).
Keep children and pets well away from the work area
and never allow children to use this appliance or
touch the extension cord at any time. When not in
use, keep this appliance stored in a safe place out of
reach of children.
Never leave the appliance unattended when in use.
Never pull the appliance by its power cord. Carry it
using the carry handle.
Do not allow the power cord to lay on or across
sharp objects that might pierce the outer insulation.
Carry out a visual inspection of the power cord be-
fore use and if it is damaged, have it replaced by a
specialist service centre. Do not use the appliance if
the cord is damaged.
Keep the power cord away from heat, frost, oil, sol-
vents or any sharp objects or edges.
Electrical connections e.g. extension cable, must be
protected from moisture at all times.
Check that the power rating on your appliance cor-
responds with the power rating at you mains supply.
The supply voltage must be 230-240 V.
Never run this appliance dry-out of the water.
Always have the appliance switched off and the plug
removed from the power socket before placing it in
or removing it from the water. Only switch the power
back on with dry hands.
Never use this appliance in a pond or swimming pool
while people are present-in the water!
Electrical Information (only for the UK)
The wires of this appliance are coloured in accordance
with the following code:
Brown: Live (L) or Red
Blue: Neutral (N) or Black
Green and Yellow or Green: Earth (E) (symbol here).
This appliance must be earthed
3 pin plugs must comply to BS / 3 63
Fuse must be 5 amp and comply to BSI362
If the plug needs replacing, the new plug must be wired
in accordance with the following instructions:
Connect the Blue wire to the terminal marked NEU-
TRAL (N). Connect the Brown wire to the terminal mar-
ked LIVE (L). Connect the Green and Yellow wire to the
terminal marked EARTH (E) (symbol here).
IF IN DOUBT CONSULT
A QUALIFIED ELECTRICIAN!
All electrical connections e.g. extension cable, must
be of an approved waterproof type for outdoor use.
Exten sion cables must be three-core, one of which is
EARTH.
Always fully unwind extension cables before use.
Connection to the mains power supply must be via an
approved residual current device (RCD), with a residu-
al operating current not exceeding 30mA.
MAINTENANCE
There are no user serviceable parts in this appliance.
Always ush through with clean water after every use.
GENERAL USE
This pump is NOT designed for continuous opera-
tion e.g. as a swimming pool or pond circulation
pump.
If used as an intermittent pump to circulate water in
an ornamental pond it must be sited in a sump or
behind a suitable barrier to stop pond life being suc-
ked into it.
Ensure there are no obstructions around the inlet
openings around the base of the pump. The inlet ope-
nings must be clear of mud or sludge at the bottom of
a pool.
If the pump is used to drain a swimming pool it must
only be used when the pool is completely empty of
people.
After use allow the pump to run using clean water for
2-3 minutes in order to remove residues and parti-
cles that may have accumulated in the pump and
out let hose.
English
GB
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Defort DVP-250N-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Defort DVP-250N-10 in the language / languages: All languages as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info