555707

Defort DLL-10T-K Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
7
GB
MAINTENANCE AND SERVICE
Maintenance and Cleaning
Store and transport the measuring tool only in the sup-
plied protective case.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool into water or other
fl uids.
Wipe off debris using a moist and soft cloth. Do not use
any cleaning agents or solvents.
Regularly clean the surfaces at the exit opening of the
laser in particular, and pay attention to any fl uff of fi -
bres.
Should a fault occur, e.g. after wear of a part, please
contact your local SBM Group dealer.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations. Take
your unwanted machines to your local SBM Group
dealer. Here they will be disposed of in an environmen-
tally safe way.
Switching On and Off
To switch on the measuring tool, push the On/Off switch
3 to the “On” position.
● Do not point the laser beam at persons or animals
and do not look into the laser beam yourself, not
even from a large distance. To switch off the meas-
uring tool, push the On/Off switch 3 to the “Off” posi-
tion.
● Do not leave the switched on measuring tool unat-
tended and switch the measuring tool off after use.
Other persons could be blinded by the laser beam.
WORKING WITH AUTOMATIC LEVELLING
Position the measuring tool on a level and fi rm support
or attach it to a tripod 6.
After switching on, the levelling function automatically
compensates irregularities within the self-levelling
range of ±4°. The levelling is fi nished as soon as the
laser beams do not move any more.
When not within the self-levelling range of ±4°, work-
ing with the measuring tool is not possible, because it
cannot be assured that the laser beams run at a right
angle to each other.
In case of ground vibrations or position changes during
operation, the measuring tool is automatically levelled
in again. To avoid errors, check the position of the hori-
zontal and vertical laser line with regard to the refer-
ence points upon re-levelling.
WORKING ADVICE
A tripod 6 offers a stable, height-adjustable measuring
support. Place the measuring tool via the tripod mount
8 onto the 1/4" male thread of the tripod and screw the
locking screw of the tripod tight.
LASER VIEWING GLASSES (ACCESSORY)
The laser viewing glasses fi lter out the ambient light.
This makes the red light of the laser appear brighter
for the eyes.
● Do not use the laser viewing glasses as safety gog-
gles. The laser viewing glasses are used for im-
proved visualisation of the laser beam, but they do
not protect against laser radiation.
● Do not use the laser viewing glasses as sun glasses
or in traffi c. The laser viewing glasses do not afford
complete UV protection and reduce colour percep-
tion.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Defort DLL-10T-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Defort DLL-10T-K in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info