555831
7
Zoom out
Zoom in
Previous page
1/68
Next page
7
GB
• Never t metal cutting elements to this appliance.
Inspect and maintain the trimmer regularly. Have the
trimmer repaired only by an authorised repairer.
Keep your hands and feet away from the cutting
area at all times. Keep your second (front) hand on
the auxiliary handle.
Always hold the trimmer at a safe distance from the
body.
Always wear protective goggles.
Always use gloves.
Only use the trimmer in daylight.
Ensure the ventilation openings are clear of debris
at all times.
Ensure there are no people or animals within 5 me-
tres of your trimming area.
Before using the trimmer, remove any stones, sticks,
toys or other foreign objects from the area.
Take care not to injure yourself on the blade tted for
trimming the lament line. After extending new cutter
line always return the trimmer to its normal operating
position before switching on.
Never reach into the underside of the appliance with
the power still on. Remove the plug from the power
socket before attempting to remove or touch the
trimmer thread hubcap.
HOW TO ATTACH THE GUARD 6
Attach the safety guard to the base of the trimmer shaft
using the fasteners supplied.
How to start/stop the trimmer
To «switch on» the trimmer rst press the safety button.
Now you can press the on / off trigger to switch on the
trimmer. Then you may release the safety button.
To switch off the trimmer release the on / off trigger.
Do not overreach while working.
HOW TO FIT NEW TRIMMER THREAD 8
When you need to replace or t new trimmer thread,
remove the plug from the power socket!
Depending on the reel design:
- either depress the release lugs on the sides of the
hubcap. Pull the hubcap off of the prop shaft.
- or remove the retaining cap by turning it counterclock-
wise.
Remove the trimmer thread cartridge from the prop
shaft and either replace it with a new cartridge or wind
on new thread. (If you wish to wind on the new thread,
then take a thread about 5-6 m long, fold it in two and
x the middle of this thread in a spool slot. Wind the
thread around the spool according to the arrow).
Fix two ends of the thread in the spool slots for the
time being.
Push 150 mm of thread from one end of the reel
through the hole in the hubcap and 150 mm of thread
from the other end through the second hole.
Ensure no thread is trapped.
Re t the hubcap assembly to the prop shaft and push it
in until it clicks in position (or secure the hubcap by the
retaining cap in case of another design).
Release the thread ends from the spool slots by sharp-
ly pul ling them out.
MAINTENANCE
Make sure that the machine is not live when carry-
ing out maintenance work on the motor!
Regularly clean the machine housing with a soft cloth,
prefe rably after each use. Keep the ventilation slots
free from dust and dirt. If the dirt does not come off
use a soft cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
The machine requires no additional lubrication.
Should a fault occur, e.g. after wear of a part, please
contact your local SBM Group dealer.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations. Take
your unwanted machines to your local SBM Group
dealer. Here they will be disposed of in an environmen-
tally safe way.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Defort DGT-255N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Defort DGT-255N in the language / languages: All languages as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info