Manual Defort DED-250N (page 9 of 89) (All languages)

555477

Zoom out

Zoom in

1/89

• Dust from material such as paint containing lead,

some wood species, minerals and metal may be

harmful (contact with or inhalation of the dust may

cause allergic reactions and/or respiratory diseases

to the operator or bystanders); wear a dust mask

and work with a dust extraction device when con-

nectable

• Certain kinds of dust are classiﬁ ed as carcinogenic

(such as oak and beech dust) especially in conjunc-

tion with additives for wood conditioning; wear a

dust mask and work with a dust extraction device

when connectable

• Follow the dust-related national requirements for the

materials you want to work with

• When you put away the tool, switch off the motor

and ensure that all moving parts have come to a

complete standstill

• Always disconnect plug from power source before

making any adjustment or changing any accessory

WHEN CONNECTING NEW 3-PIN PLUG (U.K.

ONLY):

• Do not connect the blue (= neutral) or brown (= live)

wire in the cord of this tool to the earth terminal of

the plug

• If for any reason the old plug is cut off the cord of

this tool, it must be disposed of safely and not left

unattended

USE

• On/off

• Speed control for smooth starting

• Changing direction of rotation

- when not properly set in left/right position, switch A

cannot be activated

! change direction of rotation only when tool is at a

complete standstill

• Changing bits

- insert the bit as deep as possible in the chuck

! do not use bits with a damaged shank

• Torque control

- output torque will increase as clutch ring D is rotated

from 1 to 20; position E will lock up the clutch to permit

drilling or driving heavy duty work

- when turning in a screw, ﬁ rst try position 1

and increase until the desired depth has been reached

• Holding and guiding the tool 0

! while working, always hold the tool at the greycol-

oured grip area(s)

- keep ventilation slots G uncovered

- do not apply too much pressure on the tool; let the tool

do the work for you

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in

accordance with these instructions, taking into account

the working conditions and the work to be performed.

Use of the power tool for operations different from

those intended could result in a hazardous situation.

5) SERVICE

a) Have your power tool serviced by a qualiﬁ ed repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

SAFETY INSTRUCTIONS FOR DRILL/DRIV-

ERS

• Avoid damage that can be caused by screws, nails

and other elements in your workpiece; remove them

before you start working

• Always check that the supply voltage is the same as

the voltage indicated on the nameplate of the tool

(tools with a rating of 230V or 240V can also be con-

nected to a 220V supply)

• Use only accessories with an allowable speed

matching at least the highest no-load speed of the

tool

• This tool should not be used by people under the

age of 16 years

• Use completely unrolled and safe extension cords

with a capacity of 16 Amps (U.K. 13 Amps)

• Always keep the cord away from moving parts of the

tool

• If the cord is damaged or cut through while working,

do not touch the cord, but immediately disconnect

the plug

• Never use the tool when cord is damaged; have it

replaced by a qualiﬁ ed person

• If the drill bit becomes unexpectedly jammed (caus-

ing a sudden, dangerous reaction), immediately

switch off the tool

• In case of electrical or mechanical malfunction,

immediately switch off the tool and disconnect the

plug• Secure the workpiece (a workpiece

clamped with clamping devices or in a vice is held

more securely than by hand)

• Hold the power tool only by the insulated gripping

surfaces when performing an operation where the

accessory may contact hidden wiring or its own

power cord (contact with a “live” wire will also make

exposed metal parts of the power tool “live” and

shock the operator)

• Use suitable detectors to ﬁ nd hidden utility lines or

call the local utility company for assistance (contact

with electric lines can lead to ﬁ re or electrical shock;

damaging a gas line can result in an explosion; pen-

etrating a water pipe will cause property damage or

an electrical shock)

• Do not work materials containing asbestos (asbes-

tos is considered carcinogenic)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Defort DED-250N in the language / languages: All languages as an attachment in your email.

The manual is 1,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Defort DED-250N Manual

Product: