555491

Defort DCP-150A Manual

6
Zoom out
Zoom in
Previous page
1/16
Next page
6
Important! To prevent damage and the risk of  re,
electrocution or injury, please read and observe
the following safety instructions before using the
polishing machine.
1. Safety instructions
•
• Use the polishing machine only in a clean and
dry environment.
•
• The polishing machine should be placed on the
polishing surface before being switched on or
o .
•
• Keep children away by taking the appropriate
pre cautions.
•
• Avoid switching on the machine inadvertently.
•
• Do not keep your  nger on the switch when
carrying the connected polishing machine from
one place to another.
•
• Always unplug at the mains before changing
the polishing cap or carrying out repairs.
•
• Never carry or pull the machine by its power
cable.
•
• Protect the cable from heat, oil and sharp edges.
•
• Check the cable for breaks before each use.
•
• Do not exert too much pressure when polish-
ing, but simply allow the polishing machine to
glide over the polishing surface.
•
• Check the housing and switch for damage.
•
• Do not use the polishing machine if the housing
or switch is defective.
2. Maintenance and care
•
Wash the polishing cap only by hand and hang up
to dry.
•
When not in use, remove the polishing cap and
store the polishing machine upside down so that
the polishing pad can dry and retains its original
shape.
•
The excessive use of wax and paste can cause the
polishing cap to jump o the polishing pad while
polishing.
•
Use only a mild soap and damp cloth to clean the
polishing cap.
Important! Do not use any abrasive polishing
agents!
3. Care tips
•
For optimum paintwork protection, you should
polish your car 2 to 3 times a year.
•
Wash your car at least every 2 weeks. Avoid us-
ing household detergents as these can damage
the paintwork and remove the layer of wax.
•
Wash your car with a clean sponge, working
from top to bottom.
•
Remove all insects, bird droppings and tar stains
from the paintwork daily.
•
If you use any window-cleaning agents, spray
them onto a cloth and not directly onto the
windows in order to prevent them wetting the
paintwork.
4. Technical data
Power input: 12 V
No-load speed: 3300 min
-1
Disc diameter: 150 mm
Weight: 1,30 kg
5. Instructions for use
When using wax and polishes, please observe the
manufacturers’ instructions.
Pull the textile polishing cap over the polishing
pad. Make sure the polishing cap is completely
clean.
Spread the polishing paste evenly over the pol-
ishing pad. Do not apply the polish directly to the
polishing surface
Switch the polishing machine on and o only
when the polishing machine is resting on the
polishing surface.
Place the extension lead over your shoulder and
work rst on the large,  at surfaces such as the
bonnet, boot lid and roof, keeping your move-
ments as regular as possible.
Important! Allow the polishing machine to glide
over the polishing surface. Do not exert pressure!
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Defort DCP-150A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Defort DCP-150A in the language / languages: English, German, French as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info