582023
16
Zoom out
Zoom in
Previous page
1/24
Next page
On-wall mounting (without bracket)
It is possible to wall mount a XTR loudspeaker without the supplied bracket. Simply procure the
appropriate screws for your installation to carry the speaker weight and follow these steps.
Es posible montar una bocina de la serie XTR en la pared sin el soporte provisto. Compre los tornillos
adecuados para cargar el peso de la bocina y siga estos pasos.
Il est également possible de monter les haut-parleurs XTR sur un mur sans le support fourni. Vous
n'avez qu'à vous procurer les vis appropriées d'un calibre suffisant pour supporter leur poids et à
suivre les étapes suivantes.
Use the supplied template
Two cardboard mounting templates are
provided; one for horizontal orientation
and the other is for vertical mounting.
Temporarily fix the template in the
intended location with tape or pins.
Use la plantilla provista
Se incluyen dos plantillas de cartón:
una, para el montaje horizontal y la otra,
para el vertical. Temporalmente, fije la
plantilla en la ubicación deseada con
cinta adhesiva o clavijas a presión.
Modèles fournis
Deux modèles en carton sont fournis
dans l'emballage : un pour le montage
horizontal, un pour le montage vertical.
À l'aide de ruban adhésif ou de
punaises, placez le modèle de manière
temporaire à l'emplacement de votre
choix sur le mur.
Tips for leveling template
Use a bubble level to make sure the
template is level or plumb. Mark holes
with pencil, remove the template.
Consejos para nivelar la plantilla
Utilice un nivel de burbuja para
comprobar que la plantilla esté nivelada
o vertical. Marque los orificios con lápiz
y retire la plantilla.
Astuces pour mettre les modèles
de niveau
Servez-vous d'un niveau à bulle pour vous
assurer que le modèle soit de niveau ou
d'aplomb. Marquez les trous avec un
crayon à mine, puis retirez le modèle.
Drill screw holes in wall
Pre-drill the pilot-hole locations for
mounting screws (not included). Use
screws rated to hold securely in the wall
material and have screw heads at least
0.33 inch (8.5mm) in diameter.
Taladre orificios en la pared
Taladre sobre las marcas en la pared
donde colocará los tornillos de montaje
(no incluidos). Utilice tornillos aptos para
sostener las bocinas con precisión en el
material de la pared y cuya cabeza mida,
al menos, 0,33" (8,5 mm) de diámetro.
Percez les trous de montage
Percez les trous pour les vis de montage
(non fournies) à l'emplacement des
marques. Utilisez des vis de calibre
approprié pour votre type de mur.
Celles-ci doivent avoir un diamètre
minimal de 8,5mm (1/3po).
16
español englishfrançais
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Definitive Technology XTR-60BP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Definitive Technology XTR-60BP in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info